Search results

Thanks for noticing that. It definitely fits better now! My pool company has used the threaded ones in the past and last year I noticed one of them leaking. They came out and replaced it with one of the rubber plugs. If any water does get in there does the antifreeze that I added help to...

Good Morning. I just finished my 1st closing and have a couple of questions. I used a Cyclone blower with a threaded fitting from the skimmer and blew out the lines from there. I lowered the water level below the skimmer and both returns. When blowing out the returns I let the cyclone blow for...

I posted about 2 weeks ago regarding installing a Stenner for chlorine dosing. I tried removing my current puck feeder and the unions used do not appear to be a standard size :( . After looking at the bottom of the puck feeder i noticed a 1/4" npt drain plug. Could i screw a 1/4" npt elbow...

I'm finally getting around to installing a Stenner pump to simplify the addition of chlorine to my pool. I have 2 questions though. I would like to remove my inline tab feeder and replace with some PVC piping and attach the stenner in it's place. The tab feeder is connected with 2 unions...

Good Morning Need to purchase a robotic pool cleaner for my 16 x 32 vinyl liner inground pool. I want something with Bluetooth control and want to make sure I get one that won’t cause problems with the vinyl liner. Looking for suggestions. TIA!

How would I set up a specific pump speed on a circuit?

Would it be less clunky if I could load this onto an iPad?

Good Afternoon. I currently have a Pentair EasyTouch4 that I control with ScreenLogic. The problem I am having is that my PC at home is not currently functional. How do I go about adding circuits and creating custom names for these circuits without my PC? I can run the current screenlogic...

I get what you're saying regarding the safety factor but the pool area is fenced in seperately and cannot/will not be accessed during the winter for any reason other than routine inspection.

Hello Hope this is not a stupid question. Had a vinyl inground installed 45 days ago. We live in Wisconsin and it is getting to be the time of year to shut our pool down. Our PB agreed to do the first year closing at no charge to us. He is recommending that we install a mesh safety cover...

Good Morning I just recently had an inground vinyl liner pool built and decided to go with the basic manual pool vacuum. I used to have an Intex above ground pool with a skimmer and needed a vacuum plate to hook my vacuum hose to. My pool builder is telling me that i just need to remove the...

Am I able to do set up the schedules from the ScreenLogic interface?

Good Evening I recently had an inground pool installed and finally hooked my Intelliflo VS pump to the Easy Touch panel via serial cable. I was able to program the first 4 speeds at the panel itself but have no idea how to get the pump to turn on to one of my preset speeds. I also would like...

Finally! After months of waiting we finally have our pool completed. I had water delivered last Friday and the PB added some chlorine yesterday. I plan on adding CYA later on today. When I tested the water this weekend I noticed my TA was 330. According to pool school I need to add 103oz...

Hello I am having a 16x32 vinyl lined inground installed sometime in the next 5-10 days. In my initial order I have 4 Intellibrite 12v color led lights being installed. After doing some reading on this forum I get the feeling that 4 may be too many. I don't want the pool to be too dark--I...

Good Afternoon. We were just informed by our builder that they plan on starting our build in the next couple of weeks. I have already mounted my Easy Touch 4 panel near the proposed equipment pad and am wondering if I can turn the power on to the panel prior to pump/light /heater installation...

Sorry for all of the questions, but what size breaker would I get for the intermatic px300?

Not even for a gas pool heater?

Fond du Lac is French for bottom of the lake. We are located at the foot of Lake Winnebago in Wisconsin. Do I need a separate gfci breaker for the surge protector I plan to install or do I double tap the breaker I'm using to power the easy touch transformer?

Hope this isn't a stupid question. I am getting some of the preliminary wiring started on my easy touch panel today. Do I need a gfci breaker for the circuit that powers the easy touch power transformer? TIA!

Good Morning! I am in the process of finalizing plans for a vinyl liner IG pool. It will be galvanized steel walls and I'm wondering whether an SWG is a good idea or not. I am worried about the salt causing corrosion problems with the steel walls and shortening its life span. What are your...

I am in the process of wiring my Easy Touch panel/load center and have some questions regarding the wiring. I was planning on mounting the panel outside on my rear garage wall next to where the pool equipment will be installed. I want to run 8-3 from a 40 amp breaker in the main panel to a 2...

Hello all I just recently purchased a Pentair Easytouch 4 (#520591) and am wanting to install the screenlogic 2 option. I am having a hard time finding the part # for the hardwired version of this. I am not interested in the wireless option as I have a conduit with low voltage wire going from...

If I set them up for independent operation I would end up using 2 of the 3 available relays. That may cause a problem down the road if I want to add another feature to the pool. Also, am I able to connect more than one device to the "com" port? From what I've read the vs pump connects there and...

Thanks for the quick reply. I am planning on an intelliflo vs pump, a 175k btu ng heater, and 2 deck jets. I am considering adding a stenner pump in the not too distant future. If I change my mind and decide to go with salt water system is the easy touch panel able to be upgraded to control the swg?

Hello all. This is my first post so try to take it easy on me. :p I have recently put down a deposit on a 16x32 vinyl inground pool and am considering the addition of the Pentair EasyTouch base system (#520591). I am having a couple of Intellibrite led lights installed in the pool and am...