Search results

Have no experience with those lights, so couldn't tell you. Can they be opened/serviced like the Pentair? The DigUno/ESP32/WLED combination works with dozens of different LED drivers, so probably you could find something that will work. If the TREO is nicheless you will need something...

I've been running this configuration for more than 500 hours now, so I'm confident to share it with the community as a possible solution to others who have had their intellibrite light die on them only to find out that replacing the poorly designed LED driver board is almost as much as replacing...

Perhaps the final update for this thread. Although I cant say why, or 100% for certain, the screenlogic adapters seem to have somehow been causing the problem. I disconnected the screenlogic for a few days and did not notice any phantom starts on the pump. Then I shut everything down on the...

When using the PoolMonitor app from an external browswer like Edge, the default setttings are too sleep unused tabs to conserve resources, there is setting under settings, "system and performance" / "Never put these sites to sleep" to prevent certain sites from sleeping, this will keep the log...

Thanks for all the suggestions guys. Trying to work through this methodically since as noted it is a complicated issue. I think the logs could hold some clues but Pentair basically dismisses the pool-monitor tool/logs and refuses to review the data. Anyway, last night I disconnected the...

I have never heard of anyone lubing their cables or connectors, thats a new one, but, I have double and triple checked all the wiring and connectors several times and although I could replace all the cables, nothing is pointing to that as a leading cause. Why would the cables cause problems...

I'm starting to think possibly this must have something to do with the screenlogic maybe, its the only component left that wasn't replaced. Any thoughts anyone?

Update. Some good people still work at Pentair. I got in touch with one of my regional service managers (Rolando) and got some movement finally. They came out and swapped the motherboards on both the ET and the Intellifo 3. Unfortunately, this did not fix the issue :brickwall: . I'm...

Hey Tom, Nothing yet. I sent the log file off to Pentair this morning to see what they can figure out. What youre saying make sense, I'm learning as I go. 21633 is just a status message. I don't see where the OCP actually told it to turn on. I see a lot of message '6'';s (set...

I finally captured one of the random starts in the message monitor, I have no idea how to read it though to see what it is telling the pump, but you can see in the log it causes a state change at ID: 21633 where there is no program set to run. This happened four minutes after the last program...

Allright well, I have figured out from the nice little wiki where to find the message monitor. It seems that since I have a pump but have disconnected it, the ET is constantly trying to find it with the action '4' and action '7' messages. But in the capture attached I do see the action '1'...

Hey all. No updates in a while due to holidays. Pentair has been zero help. They sent a dispatch to local warranty company who promptly called me for a $200 deposit since the pump is under warranty but the ET4 is not. I will automatically be charged if it turns out its not the pump...

Mine died a few weeks back. I built my own with some help from the Internet and some off the shelf 30 watt WS2811 Pixel modules from AliExpress. Following the recommendations of that youtube link, I swapped in a Quin-LED Dig Uno/ESP 32 controller which uses WLED software (free). I can now...

THanks TOm @ogdento . I have done an EEprom erase and reprogram twice now with no change in results, pump running for 1 minute or less at various non-programmed times throughout the day and night. Pump is not running on a relay. I suppose it 'could' be the pump itself receiving erroneous...

THanks @Jimrahbe , its definitely an option I hadn't really considered before. Initially, my main concern would have been additional cost, but thanks to the efficiency of these Pentair pumps, youre right, the math works out to about $8 a month more than running it the 8 hours I do now, so it...

Thanks @Jimrahbe. Unfortunately, last night's experiment was not successful. I heard it come on at least once at 12:08am. I'm mostly frustrated by the fact that the time it is activating during the night seems to be different every night, that is very frustrating as it is seemingly random...

@Jimrahbe , it was never really set to "run" all night because there was no flow associated, it was really just set to move the automatic valve to a particular position, and then leave it there for the morning, so that when the higher flow is enabled, less water comes out of the waterfall...

Sure, I can give that a whirl, so I just swapped out the Pool High circuit and assigned the pool high speed to waterfall. In the end I end up saving 1 schedule slot as a result, so I like this better regardless. So here's what I've got now....

Not sure if I understand the suggestion @Jimrahbe , if the pool is running 24x7 then I wouldn't expect to have it running when its not supposed to because its always on, so there's no opportunity for the problem to occur? Maybe I don't understand your suggestion?

Interesting. I was willing to give it a shot, don't think it could hurt but I don't have that option, under Pump #1 mine is set to VSF and there is no priming option.

@Jimrahbe good observation. I did that to economize on schedules. The waterfall is in, lets call it position 2, which is more closed when the pump is running high speed. I simply leave it in the more closed position, even after all the pump schedules complete at 8:30pm so when the high...

I'll try anything at this point, where do you change those settings in ScreenLogic or on the easytouch ?