Search results

It was fast and that was just with the hose water, I am excited to see how it will work with the 4" waterline that we are plumbing to it!!

Re: Owner Build W/ Rock Blasting - Loomis, CA After more than 18 inches of rain since January 1st we are finally starting to see some progress (and the sun). We installed the slide, still need to do some grading and final plumbing to it. Next up is some additional concrete work, final...

Point understood, very good insight and you have a lot more knowledge on this than I do, thank you for responding. I completely agree that the plaster was compromised in the torched areas and will need to be replaced but was hoping the Gunite was not weakened.

Re: Owner Build W/ Rock Blasting - Loomis, CA - Plaster Issues One more picture of the pool as we went through the startup. (in the rain)

Great feedback so far, thank you. I will discuss adding the walls as part of the replacement. I might even be willing to pay some to cover the walls if it means a consistent and better product in the end. As far as torching, they seemed to use it limited and more to dry the plaster vs. stop...

I don't have it in writing but have spoken with the plaster company and have confirmed the plan. (I will also ask for it in writing) The plan is to re-plaster the bottom of the pool is the spring/early summer. Has anyone re-plastered the bottom only before, leaving the sides alone? It is my...

Northern California has been hit with a ton of rain lately causing our plaster to be delayed until this past weekend. We were excited to keep the project moving forward, unfortunately everything didn't go as planned! We decided to us Quartzscapes: - Barbados for the pool and spa (spa has...

Happy Thanksgiving all! With the Holiday and family coming into town we didn't get the equipment ordered last week, I figured we could wait a week to see what Holiday sales we could take advantage of. The 3hp will be for the slide only. Below is a revised equipment list showing separate pumps...

I haven't estimated the total energy usage for the pool. I originally wasn't too concerned with it because we over-sized our PV solar system when we installed it to accommodate for a pool. Last year we over produced and our electricity bill was $0 for the year. This year we are likely going...

Good catch on the 3-phase, hmmm. Back to searching for the best pump to use. The good news is that the slide shipped today, below are some pictures of it on the pallet. ETA is 11/22

I spoke with Paradise Slides and they do recommend 200gpm but also said they believe installers typically use a 3hp pump. I also checked with Dolphin slides (similar style water slide manufacturer) and they recommend 125-150gpm. It looks like the Pentair WhisperfloXF 3hp (model 022018) can...

Our water slide is almost 39' long and requires higher flow than a standard slide. I double checked and the plans call for 200 gpm with a 3 or 4" line feeding the slide. The slide has two 3" outlets at the top. I have sent the manufacturer (Paradise Water Slides) an email to check what the...

Thanks for all the kind words! We cannot wait for it to be complete. The pool is roughly 37,000 gal with an 800 gal spa, the spa has 6 jets. Currently the plan is as follows: - 3hp pump for the pool and waterslide, the slide has a 3" pipe feeding it and the manufacturer recommends 200gpm. -...

Thank you for the feedback on the equipment, greatly appreciated! If anyone else wants to chime in we are all ears. Any recommendations on what robot cleaner to buy (or stay away from)? Below are some updated pictures:

Re: New Owner Build Pool with Rock Blasting - Loomis, CA We are now realizing why people say owner builds take so long. Trying to juggle work along with this project is making progress very slow. Not sure we are going to be as far along by Thanksgiving as we wanted to be but we are making...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA We have family coming for Thanksgiving so the unofficial completion date is by then. Originally we were hoping for the end of October but the hardscape around the pool is taking longer than anticipated.

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Some additional walls were poured on Wednesday. The water slide is going to be located on the other side of these wall and wrap around the rock to the upper level. On the far side of the wall (where the lumber is stacked) we are going...

Re: New Pool IG - Inland Empire, CA - Plaster Day 10/21! I cannot wait to see it!!

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Thanks needsajet! Slowly but surely making progress. The form boards from the first pour have been removed. We started forming additional walls for the slide area and will start the walls on the backside of the spa after the rain that...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA The slide has been ordered, below is the revised layout. The entry point to the pool is in the same spot but the start location has been moved. We decided to change the layout so it didn't impede on the upper lawn as much. The other...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA They didn't say anything about keeping it watered but we had some rain on Sunday and the skies were grey all day yesterday after the pour. The curing process seemed really slow due to the lower temps and lack of direct sunlight as...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Below are some pictures from our first concrete pour yesterday. It was a milestone day and exciting to say the least. We poured the coping, most of the lower concrete deck and one of the board form walls. We also got the equipment pad...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Friday update, The progress has been a little slow the past few weeks but hopefully we will get some concrete poured next week. The plan is to install synthetic grass between the concrete squares and coping.

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Happy Labor Day!! So we decided to go with the Poured Pewter 1x2 glass tile from NPT. We were worried with the additional bling but the deciding factor was we have friends with a pool that has this tile is installed at and we really...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA The depth of our shelf is 16"

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Southflorida, That is a beautiful pool and I really like the tile you used. Do you happen to remember what type of tile it is? Thanks!

Re: New Owner Build Pool with Rock Blasting - Loomis, CA I asked about the holes before they left, I guess it is a requirement of the gunite company. They leave those as cheap insurance in the off chance there is ground water or a rain store comes through could cause the pool to pop out of the...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA Kim, that doesn't help! lol! I guess it is good that both options we like, just hard to make that final decision. Here are some more pictures with the spa complete:

Re: New Owner Build Pool with Rock Blasting - Loomis, CA So we are getting cold feet with the pool tile we picked out above, we are worried that the Galaxy Graphite 1x2 glass tile from NPT has too much purple in it. We are considering the poured pewter 1x2 glass tile instead (see below). I...

Re: New Owner Build Pool with Rock Blasting - Loomis, CA They started at 7:00 am and left at 6:30 pm and didn't have time to finish. I am surprised with how long it is taking (I thought it would be done in a day or less) but happy that they are taking their time and everything is looking good...