Search results

Sure! We have a Nautilus CC Plus. Our liner was getting pretty faded and we knew we would have to replace it in a year or two. We had just bought the robot and within a week it had ripped a decent size hole that I patched. But during the second week of use, it went along the area right below...

Great! Thanks for the help!

I bought the pool as a kit and did a lot of the work myself. I still have the dig specs and the exact dimensions it ended up being. I think it's a pretty common kit size.

Yes it is an inground. It's actually an L shaped pool. I have the exact dimensions That it needs to be cut to.

At the end of the last season, our super cool pool robot ripped a massive hole in our liner. I had been chatting with a guy from Pools Inc about getting the new liner...but now I'm not sure if they are still in operation. I can't get anyone to respond. Any recommendations on where to buy one...

Thanks! I am in KCMO.

Hello everyone! We have a standard 16' x 24' x 42' liner pool. After 12 years, the liner is shot. We have up trying to patch it half way through the summer and just let the water drain about halfway out till it stopped at a big rip. We need to buy a new liner for next season, the problem is that...

I have no idea, but it sure does. We live at the bottom of a huge hill and had a terrible time when we were building the pool because the underground water kept filling it up before we got a liner in. Recently here in KC it has been raining a ton then just stopped. My guess is that the flooding...

Actually, I think it’s the hydrostatic relief valve that got stuck open.

Thanks! So I plugged all the ports and lost over a foot of water overnight. My only two options left is 1: the condit for the light 2: the main drain. Ugh....

Hello everyone!! I have started losing around 2” of water a day. When we took the cover off, the water was almost to the top of the pool. After we turned everything on is when we started losing water. Is there a way to check the plumbing for leaks?? I have everything turned off for the night...

Hello everyone! Every year when I close the pool, I drop the water line below the return jets and add antifreeze and plug them after blowing all the lines out with a compressor. This year I finally bought a nice safety cover...yay!! It’s supposed to hold up to 4,000 pounds. We live in KC and...

A quick follow up. I talked with a nice guy from pentair this morning. He wants me to get the meatl level of the water checked. If it has a high metal content then it could be throwing off the plates.

Well crud :(. Thanks for letting me know. I wasn’t looking forward to spending another $500 after only two years.

Should I just let it keep running and see if the light stops blinking?

Correct, it’s flashing green like a stoplight flashes. When I unplug it and then plug it back in, the green light will come on and act like it’s working for about 5 minutes, then it starts flashing. There was no build up on any of the plates either time I used the MA. The very first time the...

Yes all other lights are green like normal. I remember reading somewhere about recalibration it...?? It’s only two years old

I turned it on right after I added the salt which was three days ago. The salt level is all leveled out now. I have unplugged the cell a few times to clean it.

The “cell” light is flashing. When it’s producing chlorine the cell light is on. Right next to the light it says “ inspect cell if flashing”. When I hold down the more button it shows that it still has 60% life left.

Well, the pool is looking better! The FC is still at 15 with an overnight drop around one. I added salt and turned on the ic40 after about 5 minutes the cell light started blinking indicating that the cell” needs attention”. I did the acid cleaning twice and the cell light still blinks after 5...

I just put all new Sand in the filter two weeks ago. The water IS looking better. It’s just not where I thought it would be. I can see the third step down in the shallow end but not the actual bottom.

So, the SLAM has been going on for a little over a week. Countless jugs of 12% from menards have gone in. My cya is at 40 and the fc stays around 16. I have used the leaf sucker thing I bought and have vacuumed to waste. The water is still really cloudy. I can’t see the bottom of the shallow...

Thank you all for the epic help with our pool this year!! I appreciate the time you have taken to help us out! I’m slamming the pool now. I finally have the right amount of CYA and the FC level is where it should be. Also, I now understand the accronmys and feel like I’m part of a super cool...

Perfect!! Thanks for the help

Re: CYA / chlorine relationship is confusing! Thanks!!! So, if there isn’t much sun, can you keep the CYA level lower?

CYA / chlorine relationship is confusing! I started slamming my pool a couple of days ago. Reading through the charts and watching a couple of videos has really confused me about the CYA chlorine relationship. It looks like the more CYA you have the more chlorine you need, which seems to be...

Thank you so much for this!! I just ran down the street and stocked up!

That vac plate sounds like a great idea!! I’ll look for one now. I just did my first test with the TF100. This is what I got TC 0 Ph 8.2 Cya 0 TA 70 Thanks for all the help!!