Search results

So then your cleaner is stored in the water continuously?

If your spa is big enough to use your cleaner then go for it. I fun my spa water through the filter to the pool while netting the debris. The reverse pool back to spa.

I have an S400, this is my first Maytronics Dolphin which I purchased last year in May maybe June. The first one I received kept getting stuck on a swim-out seat by a small waterfall. I would balance itself on the edge and would stay there. Called the store of purchase I assumed they called...

I'm working on a Sta-Rite C48K2PA105 1hp motor. I want to know if this is a 48Y or 56Y frame. Looking for a front-end bell. I could measure the diameter but thought I'd ask the wizards instead. Thanks.

Check this one out...

Ok. So this is how I removed the valve piston. Embedded in ABS where the SS pin is place is a 5/16 hex head. Used 5/16 socket/ratchet turned CC ones the assembly started to turn I pulled up slightly while turning rachect. Assembly came out no issuea. I lubed orings and reinstalled for now. I...

Do you have a 6 position valve? If yes select waste that should by pass filter. If not open your filter drain and let the algae slime drain out that way. May have to connect a drain line.

Filter media is clogged. Backwashing will not resolve. Must Clem filters manually. I would bypass filter and put all the algae down your sewer clean out.

My Sta-Rite pus/pull valve 263053 handle snapped off with part of the shaft. The shaft is stuck in housing, any possible ides to removing it. I have had to clean and grease this valve monthly otherwise it would have broke sooner. The stainless roll pin even broke.Any ideas on how to remove it.

Hi, Although I joined this form in 2009 I was at the time using a SWG for chlorination of my pool. In 2013 the SWG died I was face with buying a new SWG or returning to traditional sanitation using 3.5 tabs or powered chlorine. I chose powered and it was easier the results were not what I was...

Here is the data asked for yesterday concerning the white flakes floating in my pool. I googled and read the threads and had my water tested today.. I went to the LPS and had water tested since I only have a basic test kit which I will replace very soon with a more extensive kit to perform all...

I went to the LPS and had water tested since I only have a basic test kit which I will replace very soon with a more extensive kit to perform all test needed to track my pools chemistry. The water here where I live is as hard as granite I am contemplating installing a water softener just for the...

Since I installed my SWG I have small white particles that are accumilating in my spa and pool. They look like a white gel or soft flake substance. They are not floating freely but settle to bottom of step or spa and accumilate in a pile. I dont see them in my main pool possibly due to the floor...

Here is the name of the product I was talking about.. Fiber Clear is a replacement for D.E. (Diatomaceous Earth) in D.E. filters and can be used as a filter aid or enhancer for both cartridge filters and high-rate sand filters. Environmentally friendly, non-toxic, and biodegradable. It filters...

If your going the sand route then use the zeobrite it holds more dirt and last longer.. With DE there is a non DE filtering agent on the market that work quite well. Good luck with what ever type of filter you choose.

I have a Hayward 6020 DE filter 2hp 2 speed pump & Goldline 40k SCGS I installed 2 1.5 weeks ago. I first added to much salt 4400ppm. I drained 2.8ft of pool water not quite 1/2 the pool. I added fresh water to refill pool. The digital read out shows my salt is 3500ppm but the test strips...

I just wanted to introduce myself. aside from my screen name (doityourself) my name is Mike I live in Lathrop, Ca. I have a 3.5ft to 6ft double kidney shape pool with attached spa ~25,000 gallons. Hayward PRO DE/Sta-Rite 2 hp two speed pump with a P4 and Goldline 40k salt system. I also us a G3...