Search results

I took off the Multi Port Valve to change the gasket and wanted your opinion. Is it normal for the top spokes not to match the bottom? This is a picture that I took today. Thank you! Kathleen

I've added water back to the pool and I am circulating the water now. I'll keep adding water for a while and contact a leak detection company. Thanks everyone!

I just conducted the dye test near the main drain and light. Nothing. The dye just floated along and did not pinpoint a leak. I did this twice. I also walked around the inside of the pool looking for a fracture especially at the seats and stairs. Nothing. I'm putting about 2 inches of water in...

Texas splash - I haven't tried the food dye test. I will try that! The water does keep dropping past the return jets. The problem is that there aren't any other items near the water line. I looked very closely at the fiberglass shell to see if there were any fractures and could not find...

In preparation to plug the main drain, I wanted to ask another question. I have attached a picture of the level where the water stopped leaking. It's sat at this level for about 6 hours. Still below water is the light (I was wrong in my original post) and main drain. Therefore, the leak could...

Thanks - I'm going to try this on Friday and will report back! Thank you so much for explaining everything so clearly.

Thanks YipeeSkippy - yes, I do have two lines coming up from the pool and one pipe going to the pump basket! So, I want to plug up the main drain and then have only the water coming in from the skimmer? Not sure about the small cover of the main drain - of course, there is a possibility that...

Thanks for the welcome - the only pipe still under water is the main drain and the pump is still primed. I can plug the main drain, but I'm not sure that I can shut it off completely, but I can try. What am I looking for when I do this?

Hi - I have a fiberglass pool leak and I can not find the leak. Any help would be greatly appreciated. 1. Leaks 6 inches per 12 hours if pool is running or not running. Doesn't matter, still leaks 2. No bubbles in lines, Pump stays primed when on and off. 3. Turned off the pump and allowed to...