Search results

I have a partially in ground 12' X 27' Oval pool with Hayward Pleated Cartridge Filter and Aquagenie skimmer/return distributor and a Zodiac salt system. I bought about 10 new water bags season before last. About 4 of them failed the first season and the same this last season. Problem this...

Have Hayward Filter 150 with 1500 pleated filter and an Aquagenie skimmer/return distributor. I am having high pressure problems on the filter. I recently cleaned the cartridge with solution and sprayed it out as usual. After returning it to operation it went immediately to 16 psi and within 3...

I have a partially inground pool, about 11,000 gal with a 10 yr old Zodiac system which seems to have packed it in. The cell is fairly new but I fear the power pack/control box may be shot. The Zodiacs have been discontinued so I'm looking at a Hayward acquatrol open box deal from a discount...

I finally replaced my 10 yr old pump, which was giving me serious self-priming problems. I thought, with techno advancements I would get a quieter pump but the new one is noisier. It's within 6 ft of my property line and I wondered if anyone had a recommendation for baffles to dampen sound...

My pump or possibly the suction line, or both are giving me problems. After stopping and opening pump filter basket or for cleaning filter cartridge won’t self-prime and difficulty manually priming. Have to pour water into the open filter basket several times. The motor cutout on the pump trips...

When I went to connect the power cord contacts, red, black and blue to the Cell to start up, the blue female connector metal just crumbled to pieces. Can I just strip the blue plastic off and remove from wiring then find a replacement connector to wire in? I have to find a source of these...

I have a triangular head pool vacuum. It has three removable, replaceable( theoretically) brushes. I can never find the replacement brushes from my local pool supplier and just had a non-supply notice from an online supplier - money refunded. They seem to want to always supply you a new head...

I have a Zodiac generator in my salt water pool and am not getting any chlorine. The Output light shows orange in the first position and the only other light is an orange in the Add Salt position - can't change the Output. The Salt is fine - about 3700 ppm. Probably need a new cell? I...

The locking ring "Easy Lok" on my XStream 1500 filter is becoming difficult to almost impossible to both turn to lock and then unlock to open. It first started last season and then this year the pool opening guys said they had a terrible time turning to lock and that I would probably have to buy...

Have partially (mostly) inground pool with liner pulled of top of wall under coping in two spots. I tried to fix by getting coping off to put the lip of liner over the top again but doesn't work. There seems to be downward protruding stops on underside of coping preventing me from sliding...

Was troubleshooting filter pressure this week and have had continuously more difficulty opening and closing of easy-lok assembly. Have cleaned thread areas with detergent, water , brush. But now it's kind of seized up part way to locking position. Had to hammer it off with rubber mallet on...

My normal clean cartridge filter pressure is ~ 12.5 psi. After about 1.5 months it crept up to ~ 17 psi and I stopped filtration and cleaned it (All normal). After reinstalling and starting up it fairly quickly went up to 18 psi. I checked everything I could in return system, including my salt...

Still Trouble shooting my pool after opening. My Aqua Genie Skimmer seems to be generating a lot of waves and bubbling and attendant noise around the return. It's slightly above the fill mark and I can hear the noise through a closed door. If I just push the inlet weir down slightly it calms...

Still pursuing my high pressure problem. Is there any chance my Aqua Genie nozzle slot flow could have become restricted on closing or opening the pool?

I have a 12 X 27 onground/partially inground pool with a Hayward cartridge filter. Normally a fresh/clean filter starts at about 12.0-12.5 psi and I remove to clean at about 18.5-19.0. After I had my pool opened by my pool supplier crew I had to top up the water level before (a day later)...