Search results

the SWA, it only fits the SWG as due to the incoming it blocks about 4-6" so I am not sure if I can put a union there, I will need some spaces for the union. What about option 2 where I need to remove the chlorinator, the issue there is too many union and I don't have a place to cut allowing...

I’ve chosen the circupool run 45+, like yours. Should I remove the chlorinator or just put it where I’ve labeled swa (swg) & the flow switch in options 2 is fined then? This setup would be least amount of work.

My bad, it’s swg, autocorrect messed it up.

See the attachments of my setup as I am leaning forward as option 2 as it still keeps my old chlorinator using tablets and without having to cut the existing setup. I would like to put the flow switch and swa together but I don't think there's enough space for me to do this. Any recommendation...

I am also considering switching, how much did it costs you to switch? TIA.

Hi, I am in Sugar Land so about 45 mins from Spring, just want to be sure not to waste a trip. Do we need an appointment of just drop by when they are open as you mentioned only 3 days a week to the public, do you have the time and day? I am struggling finding any chlorine in any of the...

MK, you're right. there are 2 holes under the skimmer and nothing is covering them, it's open. Is this normal? What I've noticed, if my filter is on pool, all the suctions come from either the skimmer or vacumn, not the main drain, when I switch to Spa, I see the Vac Alert moves up with...

For some reason I don't feel that there is any suction from either the main drain or from the spa as I don't see where I can switch on/off from the skimmer or vacumn. See my pic for my pool plumbing. The Vac-Alert system remain at 0 as it doesn't seem to have any pressure coming in. Also on my...

Thank you James, your response is really appreciated & helpful.

Anyone know where to get chlorine in drum or large quanity with decent price? Summer is comming and bying per gallon can be expensive and inconvenient. TIA.

Hi, I think my heater fused is burned so I am trying to find a replacement but so far searches return nothing could fit in the slot. The heater is Hayward and I hope this is the only issue. The fuse is 1.5A/250V and it is about 14mm. All I can find ones are either 10mm or 20mm, can't find...

I think it is an LED as it multi color, I'll confirm once I get home today.

so we have our pool built for about 8 years now and we hardly use the spa light, maybe 20 hr max, now it won't turn on, is this normal? TIA.

You're correct, it is the GFCI. I'll ask an electrician to come by and have a look. Thanks.

Hi experts, For some reason my lights won't turned on any more so I went to the pool electrical box and saw that it had tripped the surge proctector. I've reset it and turn it on and again it tripped it, what could cause this to be tripped? TIA.

I am not sure, this is what Leslie's Pool guy told me. I'll try to clean the area and if the low speed is working, I'll try to buy some as much time as I can before replacing it. Tks.

So I took my pump to Leslie and they said my highspeed is throwing sparks but the low one is working fine, can this be fix or motor needs to be replaced?

I think I found a replacement with the same as original specs. Hayward Motor, 2-1/2hp Maxrate 2-speed Tristar 208/230v (spx3220z2mer, sp3220z2mer) - INYOPools.com To avoid all trouble, I think I just going to purchase the above. Thanks for helping.

Ok, so if I downsize from 2.5 to 2.0 HP, I just need the correct impeller specify the the pump manual, e.g. This is what I would need to replace. SPX3220C Hayward Tri Star Impeller 2 Hp w/ Impeller Screw I have the cross ref between Emerson and A.O but not sure how to read it. I'm still...

Can I downgrade the HP to 2 as there are more of these than 2.5hp? if so, do I need specific specs to make sure it is compatible? I saw this one: A.O. Smith 2 HP Dual Spd. Motor - Full Rate (B984, B2984) - INYOPools.com the only issue I see is that it's a little bit longer than my original...

so my motor is 2 speeds and the high speed is not working (sparkling) and I got a quote from Leslie for a single speed motor is $350 and they don't have 2 speed in stock. My currrent motor specs are 2.5 HP, SF 1.10, Frame 56Y, Volt 230, RPM 3450/1725. I think I want 2 speed but so far...

I decided to take the motor out for service, before I show it to Leslie Pool, how do I know which motor is compatible with my pump? Attached is my current motor. Got a quote from Leslie Pool: Highspeed is not working but low speed seems to be ok. A replacement with the following will cost...

so I tried to start the pump today and I hear the humming sound but then it shuts down completely, the motor never gets going. do you think it's a capacitor or motor that need to be replaced?