Inground Pool light 3 3/4" lens gasket search

suiteloc8 · May 24, 2025

Hello..........
I am in search of a gasket for an old 12V spa light, which has no identifying markings on the can. The lens is approximately 3 3/4" to 3 11/16" round. The lens has "Wade Design" printed on it.
I have already tried the Hayward SPX0590G, which was a perfect fit around the lens, but it was slightly too thick to secure the locking ring around it. I need a gasket that is slightly thinner. Possibly a cross section of 1/4" to 5/16" thick.
Any help would be greatly appreciated.......thank you all.

kimkats · May 24, 2025

Hi and welcome to TFP!

I may have just the person/company for you. Let me give them a buzzz @InyoRich Can you help them out? They will pop in when they get this message!

InyoRich · Tuesday at 3:32 PM

Ugh. I wish I had a good answer for you, but I don't. A wild guess is that you have an old Anthony spa light - and we can't find any information on a gasket for it.

Would adding a little lubricant to it help the locking ring mount to it?

suiteloc8 · Tuesday at 4:32 PM

Thanks for getting back.....I'll give that a try.
If that doesn't work, would I be able to update with a new can and gasket with the existing wiring, or is a new electrical line required?

InyoRich · Wednesday at 9:07 AM

Unfortunately, you will have to replace the light fixture and the wiring to it. Depending upon the age of it and the length of the run, this can be difficult (and expensive) to do.

Search

Inground Pool light 3 3/4" lens gasket search

suiteloc8

New member

kimkats

InyoRich

suiteloc8

New member

InyoRich