Pool wall moving
- Thread starter sunshine7kid
- Start date
- Jun 1, 2018
- 16,145
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
- Jun 1, 2018
- 16,145
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
One note -
While your pool looks nice & level, I noticed in your pavers appear to be sitting on top of the ground that the liner bottom is resting on. They should instead be buried with their tops at ground level. This is because if the legs are too high the liner will pull on the frame instead of all the pressure being distributed evenly as designed. The pavers can also cut into the liner as the pool moves naturally with use.
While your pool looks nice & level, I noticed in your pavers appear to be sitting on top of the ground that the liner bottom is resting on. They should instead be buried with their tops at ground level. This is because if the legs are too high the liner will pull on the frame instead of all the pressure being distributed evenly as designed. The pavers can also cut into the liner as the pool moves naturally with use.
Similar threads
