Fiber to LED conversion

Jump to latest Follow Reply
T

Tubbs

Active member
Nov 20, 2021
38
Las Vegas
I have these fiberstar fixtures and would like to convert to the PAL Treo micro.
These were for the shears above them, not sure how to remove them maybe glued into the conduit?
The fiber is in a 1" conduit so the Treo's would work but these are pretty shallow not sure how well they would light up.
I can't find any info on these as far as how they were installed or how to remove them.
 

Attachments

  • Shear 1.JPG
    Shear 1.JPG
    213.3 KB · Views: 11
  • Shear2.jpg
    Shear2.jpg
    103.8 KB · Views: 10
You would not remove those. It appears you have FLW feature fixtures that glue to 1 inch PVC. They glue onto the conduit. SR Smith purchased Fiberstar…..SR Smith offers an upgrade option that replaces the old Fiberstars Illuminator…..

Converting Fiberstars to LED Lights Offers Customers Brighter Pools

As featured in the July 2020 issue of AQUA, this article focuses one renovation that makes sense to pool owners - replacement of aging Fiberstars lighting systems with LED.
www.srsmith.com www.srsmith.com

www.srsmith.com

PT-6001 and PT-6002 Fiber to LED Conversion Kit

The new and improved additions to the Power Tower Series include the PT-6001 and PT-6002. These fiber to LED conversion kits are a direct replacement for Fiberstars 6004/2004 fiber optic illuminators.
www.srsmith.com www.srsmith.com

https://www.srsmith.com/media/ruihue1e/99856_sl_srs_poollighting_8-5x11_brochure_nocrops.pdf (page 16)

https://www.poolinspections.com/manuals/lights/fiberstars-product-book-2000.pdf (Page 28 describes your fixture I believe).

The broadcast lens is removeable. I’m unsure if you can find a light that will fit inside the housing itself, especially because of its 90 degree design. I’ll keep digging. Perhaps SR Smith can give you some guidance if they have a retrofit for that style of fixture.
 
Last edited:
I think I could remove the fixture, buy three PAL Creo Micro lights and a transformer/controller for a lot cheaper.
unless there is a conversion for the 90 degree fixture. Would probably need a inside pipe reamer to clean out the conduit.
 
Last edited:
You must log in or register to reply here.
Top Bottom
Back
Jump to latest Follow Reply