I have a 24' circular Intex XTR above ground pool.
I slightly underestimated the amount of sand I'd need to build a pad under the liner this year.
Just guessing, I'd say the sand pad is an inch or two undersized causing a slight overhang of the pool liner all the way around.
See attached images featuring a top-down view of the issue at hand, as well as a cross section view. (Proportions not to scale)
My concern is that with the liner overhanging the sand layer slightly, will that cause unintended stress on the material? And if so, is it a concerning amount of excess stress, or something I can probably stop worrying about?
Thank you!
I slightly underestimated the amount of sand I'd need to build a pad under the liner this year.
Just guessing, I'd say the sand pad is an inch or two undersized causing a slight overhang of the pool liner all the way around.
See attached images featuring a top-down view of the issue at hand, as well as a cross section view. (Proportions not to scale)
My concern is that with the liner overhanging the sand layer slightly, will that cause unintended stress on the material? And if so, is it a concerning amount of excess stress, or something I can probably stop worrying about?
Thank you!
