Turning pool on i have slight pressure barely but slight not enough to move the cleaner. Once the booster turns on i lose the little pressure I have and have 0 pressure at that point. The rest of the circulation outlets (2) in the pool push water harder but not the cleaner outlet. Please someone help
Booster pump turns on but cleaner has no pressure.
- Thread starter jhulkow
- Start date
- Jul 21, 2013
- 65,285
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
The booster pump hoses are reversed.
Water goes into the booster pump at the front and then is pushed into the pool through the top pipe.
The booster pump hoses are reversed.
Water goes into the booster pump at the front and then is pushed into the pool through the top pipe.
- Jul 21, 2013
- 65,285
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Installed new booster motor and seems I didn't pay attention to my hoses on reassemble. Lol wow
- Jul 21, 2013
- 65,285
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I hope you replaced the original shaft seal while you were at it otherwise it will leak very soon and take out the new motor.
TFP is a registered 501(c)3 non-profit that is maintained by user donations.
The people who answer questions are volunteers.
If you find the site to be a good resource, please consider making a donation to help support the site.
Thanks.
www.troublefreepool.com
The people who answer questions are volunteers.
If you find the site to be a good resource, please consider making a donation to help support the site.
Thanks.
Become a TFP Supporter
Help Support TFP Trouble Free Pool is run by a dedicated group of volunteers that … Read more…
www.troublefreepool.com