So I learned the tfp and slam method a few years ago and everything was going great. We had a cover catastrophe this year and the pool was a mess. I attempted a 10 day slam but am still at this green/blue and able to see about 3/4 of the way down point. I even attempted a roughly 50% drain/ refill. My ph is slightly low and I will be getting something to help with that. My biggest issue is cya that Darn dot never disappears so I am sure that might be an issue. Any help or anyone in the Akron/canton area willing to help
Pool blueish green
- Thread starter jasonegreen1978
- Start date
- Jun 22, 2014
- 52,078
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Looks like your standard algae bloom in all its glory. Can you post a full set of water test results please?
15x30 above ground. The 4 fc was from 7am-3:30 pm so it seems my cya might be low but again I am horrible with that( even had the standard solution and couldn’t get it right) I am really thinking my cya is low with sunlight taking it so low during the day 
- Jun 22, 2014
- 52,078
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Okay, well now it's time to perform the SLAM Process and get that FC up to "12". Maintain it as best as you can. The closer you follow that SLAM Process page the more effective your SLAM will be. Good luck!
Went to a much more blue color and can now see my robot all through the pool so definitely progress as the slam continues
Pattern on the bottom is now visible so it’s definitely getting clearer. Thanks again for the assistance and reminding me to just trust the process
- Jun 22, 2014
- 52,078
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
