I cannot for the life of me figure out what is causing wet spots around my pool pump and filter. I don’t see any leaks or feel anything wet on the pump or filter. I have checked both drain plugs and the strainer cover/gasket on the pump. I’ve also checked all piping as well as the filter’s drain cap/gasket. Where else can there be leaks?
Leaking somewhere
- Thread starter 3FootPool
- Start date
- Jun 22, 2014
- 52,167
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
My guess would be the shaft seal on the motor. It would slowly leak and drip down into the bottom of the casing and find a place to escape onto the ground.