Hi folks.
Thanks for welcoming me on your board. I've been reading many of your posts over the past few months during my 14'x'28' steel wall inground pool installation which have been extremely helpful, so thank you. I am about to wire up my Pentair Superflo VS 1.5 HP pump, and just wanted to get a sanity check on my wiring. I have a double-pole, 20 amp GFCI breaker to provide 240v to the pump. Looks like I just need to run three 12 AWG wires to the pump. Two wires will both be hot wires from each side of the breaker, and then one ground wire.
Appreciate any help in advance.
thanks
Marty
Thanks for welcoming me on your board. I've been reading many of your posts over the past few months during my 14'x'28' steel wall inground pool installation which have been extremely helpful, so thank you. I am about to wire up my Pentair Superflo VS 1.5 HP pump, and just wanted to get a sanity check on my wiring. I have a double-pole, 20 amp GFCI breaker to provide 240v to the pump. Looks like I just need to run three 12 AWG wires to the pump. Two wires will both be hot wires from each side of the breaker, and then one ground wire.
Appreciate any help in advance.
thanks
Marty
