Can pool robots clean sidewall of pools with safety ridge?

Jump to latest Follow Reply
G

geosoph

New member
Aug 28, 2023
4
Canada
Pool Size
3567
Surface
Fiberglass
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-3)
Hi all, I’m looking at purchasing a pool robot but the sidewalls of my pool are not completely flush and wondering if folks with such pool shapes have success?

My pool (fiberglass) has a safety ridge/ notch about halfway up the pool and all along the sidewall like the photo below. Will a robot be able to climb completely up such a vertical surface to get to and clean the waterline?

IMG_9505.jpeg

Thank you
 
g,

The robot should still be able to get up to clean the water line tile, but it obviously won't do any cleaning right at the "safety ridge"

It will also not do steps or above the steps..

Thanks,

Jim R.
 
My pool robot doesn't struggle with the safety ledge. it easily climbs and does the waterline. It seems to suck any sand or detritus off the ledge no problem either but I wouldn't say it gets any brushing action on the ledge.

I brush my ledges and steps manually. The robot will have a go at the second and third entry step but it's hardly thorough IMO and will get itself hung up for a minute or two pretty regularly.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply