Long story short, around 5 weeks ago, I posted an issue about having algae every 2-3 weeks. Right now that is better and I haven't had an outbreak since my last SLAM. I have, however, found that on the step seals(the plastic seal right under my fiberglass steps, where they trim the liner around the steps) has these small flaps, mainly in the corners and there is bits of green algae hiding in there. I have been brushing it out, with a very small brush,once a week and I have no chlorine loss in the OCLT, so it is sort of at bay.
Question is, how can I trim that down and get a good clean cut? Exacto knife? Any particular style of razor blade?
This is on the top of the seal srtip, so the liner is sandwiched in between the steps and step seal.
Question is, how can I trim that down and get a good clean cut? Exacto knife? Any particular style of razor blade?
This is on the top of the seal srtip, so the liner is sandwiched in between the steps and step seal.
