Upon opening my pool this year the ScreenLogic app for my Pentair equipment no longer shows me the actual ORP and pH reedings for the pool. It only shows me the pool level of chlorination for the SWG. Any idea how to get those values back?
Pentair ScreenLogic app not showing ORP or pH
- Thread starter mpbehren
- Start date
M,
I suspect the set up box is not checked for the IntelliChem,
Thanks,
Jim R.
I suspect the set up box is not checked for the IntelliChem,
Thanks,
Jim R.
Thanks Jim,M,
I suspect the set up box is not checked for the IntelliChem,
Thanks,
Jim R.
What interface are you using here? I've just never seen it. I've only ever had the app on my phone connected to the screenlogic on my pool so I have no way of getting to these settings that I know of.
I installed the screenlogic interface myself, but just never seen these settings before.
Any help would be great.
Thanks,
Matt
Matt,
I use my PC about 99% of the time.. For me it is 10 x better than my phone.
You can go to Pentair website and download it.
That said, almost anything you can do in ScreenLogic, you can do using the little LCD on the main panel.
Menu, Settings, IntelliChem. Enable.
We are not great fans of the IntelliChem system here at TFP, but I hope it works well for you. It is kind of like Autopay at your bank. Some people love it, but I like to be in control of what is happening and not relying on something to do it for me.
Thanks,
Jim R.
I use my PC about 99% of the time.. For me it is 10 x better than my phone.
You can go to Pentair website and download it.
That said, almost anything you can do in ScreenLogic, you can do using the little LCD on the main panel.
Menu, Settings, IntelliChem. Enable.
We are not great fans of the IntelliChem system here at TFP, but I hope it works well for you. It is kind of like Autopay at your bank. Some people love it, but I like to be in control of what is happening and not relying on something to do it for me.
Thanks,
Jim R.
Jim,
I went to LCD panel and there is no option to enable IntelliChem. What does it mean? Installer did not configure correctly?
Not that I need to enable it but would be good to know why I don't even that option.
Thanks
Matt,
When using the EasyTouch's 3" LCD it would be...
Menu, Settings, IntelliChem, .. does not have enable, but lets you set things up.
I can see that option, even though it is NOT enabled in ScreenLogic.
Jim R.
When using the EasyTouch's 3" LCD it would be...
Menu, Settings, IntelliChem, .. does not have enable, but lets you set things up.
I can see that option, even though it is NOT enabled in ScreenLogic.
Jim R.
Matt,
That is also what I get..
I currently have "IntelliChem" not enabled in ScreenLogic.
If you select Status, then it will allow you to turn IntelliChem on or off.
Thanks,
Jim R.
That is also what I get..
I currently have "IntelliChem" not enabled in ScreenLogic.
If you select Status, then it will allow you to turn IntelliChem on or off.
Thanks,
Jim R.