So took the old pool down and bought an 18x52 coleman. it had foam underneath but I noticed the foam pieces were not all completely level (from age) so I guess I will have to trash them?
I had somebody put the pool up but noticed as it was filling up that it wasn’t completely level. Had it taken down again.. And then proceeded to get someone to get the ground level.
This is where I’m at.
Question a.. What do I put underneath besides some silly thin cloth. Cool man comes with a round blue tarp. But I don’t feel that’s good enough.
Question b..
I noticed that when people put their pool together there is a bit of an indent so that way when the pool starts to be filled the bottom part is pushed out against the ground indent.
If you notice in the photo one side is completely level with the brick. And the other has a slight indent. Does that matter..
I had somebody put the pool up but noticed as it was filling up that it wasn’t completely level. Had it taken down again.. And then proceeded to get someone to get the ground level.
This is where I’m at.
Question a.. What do I put underneath besides some silly thin cloth. Cool man comes with a round blue tarp. But I don’t feel that’s good enough.
Question b..
I noticed that when people put their pool together there is a bit of an indent so that way when the pool starts to be filled the bottom part is pushed out against the ground indent.
If you notice in the photo one side is completely level with the brick. And the other has a slight indent. Does that matter..
You cold cover the ground with some home insulation panels or Gorilla Pads cut to size. Those are quite popular. As for the indent, as long as the pool itself is level and any supporting posts/pavers are flat I suppose it would be okay. Maybe a fellow AGP owner will provide more thought.
