L
Featured content
0
Reaction score
4

Joined
Last seen

Latest activity Postings Media About

    • L
      LovelyGong replied to the thread Smorobot X10 review.
      OCLT was good, lost 0ppm. I think part of it is the shape of my above ground pool walls. They're not perfectly vertical but have a bit...
    • L
      LovelyGong replied to the thread Smorobot X10 review.
      Can you tell a difference on the mesh on the regular and ultrafine? I can't and the labeling is not great so I'm not 100% sure which is...
    • L
      LovelyGong replied to the thread Smorobot X10 review.
      On the areas I manually vacuumed there's nothing there. I'll do an OCLT tonight to confirm but chlorine usage has been pretty minimal...
    • L
      LovelyGong replied to the thread Smorobot X10 review.
      Filter has been between the ribs. I do see the fan move lots of water but usually only when it's doing the walls or turning. Otherwise...
      • PXL_20220805_212839347.jpg
    • L
      PXL_20220805_212839347.jpg
    • L
      LovelyGong replied to the thread Smorobot X10 review.
      How good does yours collect dirt and silt? I've run my X11 a few times and it seems to stir it up but not really capture any in the...
    • L
      $10,000 for equipment or 10k for total build? I suspect the latter as 10k on equipment would be quite the budget. As you look at filters...
    • L
      LovelyGong replied to the thread Where do Intex pools fail?.
      There's not a lot to go wrong on the pool itself. Either the steel parts rust out or the liner wears out. Having proper pool chemistry...
    • L
      LovelyGong replied to the thread Fluctuating PH.
      Your TA seems pretty decent for stability. What ph is it hitting before you adjust it down? Depending on CSI values I'd probably let it...
    • L
      LovelyGong replied to the thread Agp with tracked robot.
      It should be. As far as I know there's no issues with robots, wheeled or tracked, in AGPs. I ordered a SMOROBOT Tank X11 for my 17 x 30...
    • L
      Yes, tablets contain CYA. If you want to add chlorine and nothing else the only way to do that really is liquid chlorine (and an SWG...
    • L
      LovelyGong replied to the thread Intex Salt Water System.
      I've gotten the low salt code due to scale on the SWG cell plates so not likely to be that. It's possible that you were right on the...
    • L
      LovelyGong replied to the thread Drainage around pool.
      First step would probably be working on the grading around the pool. Try to have the grade go away from the pool to have water run away...
    • L
      LovelyGong replied to the thread Am I overthinking this?.
      The indent shouldn't be an issue as it should be far enough away from the pool itself that the liner won't touch it at all once it's up...
    • L
      It does sound like overkill. Pavers would be easier and possibly cheaper with the cost of lumber right now. Any reason you're thinking...
  • Loading…
  • Loading…
  • Loading…