I'm planning on DIY install with a few subcontractors.
General Info:
20x40 with 2' Corner Radius
Sports bottom 3.5' at ends 6' in middle.
I plan on 2" Rigid PVC for all lines and dedicated lines to everything (except 2 stair returns joined and main drains joined as shown) and all having valves at pad.
Cartridge Filter
Variable Speed Pump
Salt Chlorine Generator
Possible Rooftop Solar (Will plumb with bypass in case we add it later)
Equipment will be housed in Pool Shack (Outdoor Kitchen and bathroom)
Question: Return and Skimmer placement?
Initial proposed design For suction (Brown) and returns (Green) from the diagram in the install booklet. The direction lines for returns are just thrown in and part of what I need advice on.
Are the 5 return locations well placed? If they are what would be the direction of the jets? Is one circular flow still the best option or would a north circle and a south circle at the surface be better with the right side jet aimed straight across as it appears this configuration would produce?
Or would this be a better option?
Is it best to have both skimmers on the one side (away from the prevailing winds) and how far should they be placed from the ends of the pool? 1/4 centered in each half of the pool or 1/3 evenly spaced over the length of the pool?
General Info:
20x40 with 2' Corner Radius
Sports bottom 3.5' at ends 6' in middle.
I plan on 2" Rigid PVC for all lines and dedicated lines to everything (except 2 stair returns joined and main drains joined as shown) and all having valves at pad.
Cartridge Filter
Variable Speed Pump
Salt Chlorine Generator
Possible Rooftop Solar (Will plumb with bypass in case we add it later)
Equipment will be housed in Pool Shack (Outdoor Kitchen and bathroom)
Question: Return and Skimmer placement?
Initial proposed design For suction (Brown) and returns (Green) from the diagram in the install booklet. The direction lines for returns are just thrown in and part of what I need advice on.
Are the 5 return locations well placed? If they are what would be the direction of the jets? Is one circular flow still the best option or would a north circle and a south circle at the surface be better with the right side jet aimed straight across as it appears this configuration would produce?
Or would this be a better option?
Is it best to have both skimmers on the one side (away from the prevailing winds) and how far should they be placed from the ends of the pool? 1/4 centered in each half of the pool or 1/3 evenly spaced over the length of the pool?