Fix deck jets or just let it be?

tawatson71 · Mar 30, 2022

PB installed 2 deck jets. Pictures should be attached. One is above the grade of the concrete and one is below the grade. Jets are functioning fine. The one above grade I have tripped on and I’m afraid I will eventually step on it and crack it. I’m not a small person. Plus I’m worried about safety for small kids tripping. Is there anything that be done about this? Building up concrete around it would probably look bad. Is there any concern for the one below grade? Will water sitting in it eventually cause issues? I’ve brought it up to my PB, but I’m having my doubts that anything will get done. Am I worrying too much? Thanks.

AQUA~HOLICS · Mar 30, 2022

Quality of workmanship is unacceptable. Safety concern for above grade deck jet and below grade jet will collect debris and will have a effect on its performance. Elevations should have been shot by the deck crew prior to pouring to ensure proper placement.

tawatson71 · Mar 31, 2022

AQUA~HOLICS said:
Quality of workmanship is unacceptable. Safety concern for above grade deck jet and below grade jet will collect debris and will have a effect on its performance. Elevations should have been shot by the deck crew prior to pouring to ensure proper placement.

Thanks for the reply. Do you know if this can be fixed without completely re-doing the concrete?

1poolman1 · Mar 31, 2022

Both of those installations pose a safety hazard and should be fixed.

AQUA~HOLICS · Mar 31, 2022

Don’t think that their is a way to gain access to the plumbing supply line without removing concrete.

Search

Fix deck jets or just let it be?

tawatson71

Member

AQUA~HOLICS

Attachments

tawatson71

Member

1poolman1

AQUA~HOLICS