New and 1st Build Intex 32x16

Doddsie

Member
Mar 29, 2021
8
North Dakota
Pool Size
14500
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Intex Krystal Clear
Hi everyone! Wanted to introduce myself to this great forum. Thank you for sharing all your knowledge.

Landscapers come this Monday to level and compact 20x40’ of hard clay for build. 1” Owens corning 150 foam board with 2- 8x16x4 concrete pavers at each of the 24 legs level with top of foam board. Is all this planning supposed to make my head hurt so much?
 

Attachments

  • 1B1C2A9E-E2BB-4287-BB33-3DF300EA0DE1.jpeg
    1B1C2A9E-E2BB-4287-BB33-3DF300EA0DE1.jpeg
    117.4 KB · Views: 25
  • FDB7C6CF-F427-47F0-994A-AEE80A4F19D2.jpeg
    FDB7C6CF-F427-47F0-994A-AEE80A4F19D2.jpeg
    128.7 KB · Views: 23
  • EF7F96E1-B375-4E40-8E3A-C519D3327852.jpeg
    EF7F96E1-B375-4E40-8E3A-C519D3327852.jpeg
    105.7 KB · Views: 24
Sounds like you're off to a great start! And will be swimming soon! Here are a few articles for you-


How are you set for testing your pool water?
TF-100 is an ideal kit, and the fancier TF-100 Pro Salt is what I use. www.tftestkits.net
or...
order up a Taylor 2006C kit from someone on the webs. Just make sure its the "C" version for comparison to the TF-100.

Maddie :flower:
 
Landscaping done left with some small rocks and dirt chunks I have to clean up. Next step pavers.
 

Attachments

  • 88DE6DD2-4081-4A96-AC12-A98217220853.jpeg
    88DE6DD2-4081-4A96-AC12-A98217220853.jpeg
    102.5 KB · Views: 19
Have installed the pavers and wondering how much the legs will move as water fills the pool. I am a little concerned on one of the 16' ends the leg with 6 inches of water is only on the paver 2" will the legs on the short end move out also?
 
It’s been a long road but finally seeing results. Plumbed con the heater Monday and last night was first night swimming in a heated pool.
 

Attachments

  • 4F396C75-0BFF-4EC7-B0F3-19FD430E0597.jpeg
    4F396C75-0BFF-4EC7-B0F3-19FD430E0597.jpeg
    604.4 KB · Views: 17
  • CD62E3E2-C68C-4A64-98E0-798E694BA9C3.jpeg
    CD62E3E2-C68C-4A64-98E0-798E694BA9C3.jpeg
    507.2 KB · Views: 19
  • 5369BB62-AF92-459A-8DEF-FB04C6EAF98F.jpeg
    5369BB62-AF92-459A-8DEF-FB04C6EAF98F.jpeg
    614.4 KB · Views: 20
  • A4BC5E10-AB2B-4419-88BF-8F271E65E84F.jpeg
    A4BC5E10-AB2B-4419-88BF-8F271E65E84F.jpeg
    394.3 KB · Views: 17
Installed the heater Monday as above and so far so good, working great
 

Attachments

  • 3E7A839A-AB40-41C9-AB02-3A677AA38794.jpeg
    3E7A839A-AB40-41C9-AB02-3A677AA38794.jpeg
    604.4 KB · Views: 6
  • 17BDEFAD-5AB0-4935-B32B-E85BCD145D36.jpeg
    17BDEFAD-5AB0-4935-B32B-E85BCD145D36.jpeg
    372.3 KB · Views: 6

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.