I have had a new intex type pool (5,100 gal) up for a few weeks. I use a summer waves SWG and intex sand filter. I have been monitoring with test strips just to make sure I don’t see any crazy changes and finally took my water to get tested at a pool store yesterday. I am a little confused whether or not I should try to adjust the alkalinity.
Per TFP, my ideal level is 60-80 with 90 max. The pool store shows 120-140 as normal. My results were 120.
My PH is in good range 7.8 per TFP so I’m worried if I try to lower the alkalinity it will automatically lower the PH.
Am I missing something? There’s a big difference between 60-80 and 120 ppm so I’m afraid of ignoring it. Thank you for any input! Ryan
Per TFP, my ideal level is 60-80 with 90 max. The pool store shows 120-140 as normal. My results were 120.
My PH is in good range 7.8 per TFP so I’m worried if I try to lower the alkalinity it will automatically lower the PH.
Am I missing something? There’s a big difference between 60-80 and 120 ppm so I’m afraid of ignoring it. Thank you for any input! Ryan