- Sep 16, 2019
- 30
- Pool Size
- 26000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Universal40
I just took off the tarp two weeks ago, water was black. I started putting LC in and just mixing. Pool moved from black to light green I can see the floor.
I began raking the leaves off the bottom and brushed some more. I had a friend help me unplug the pool ( he know way more than me ).
So I think, I have a leak . I know I have leak. I had the water fill me up to the top, now three days later I am two inches below the skimmer on both shallow and deep in. I skimmed out the leaves after the pictures.
When I check the pump, I found a lot of small gravel stones.
Should I just drain it, clean it and find the leaks or whatever?
I am getting frustrated. I am trying to make the best use of my quarantine time and getting it done now and early.
1) I think my deep end skimmer is damaged in the plumbing. The main drain is pulling the water and recirculating.
2) the circulation is not strong consistently, pushes out strong, then backs off.
3) How am I doing to get the powder into the filter if the water is not high enough?
I began raking the leaves off the bottom and brushed some more. I had a friend help me unplug the pool ( he know way more than me ).
So I think, I have a leak . I know I have leak. I had the water fill me up to the top, now three days later I am two inches below the skimmer on both shallow and deep in. I skimmed out the leaves after the pictures.
When I check the pump, I found a lot of small gravel stones.
Should I just drain it, clean it and find the leaks or whatever?
I am getting frustrated. I am trying to make the best use of my quarantine time and getting it done now and early.
1) I think my deep end skimmer is damaged in the plumbing. The main drain is pulling the water and recirculating.
2) the circulation is not strong consistently, pushes out strong, then backs off.
3) How am I doing to get the powder into the filter if the water is not high enough?