Bought a Water Tech Pool Blaster Max Li Pool & Spa Cleaner for picking up debris at the bottom of the pool. It works great. However, I am not sure what's the best way to take it out of water without letting all the debris falling back into the pool.
When removing out of the pool, hold it straight up so the cleaning pad is facing up and water is draining out the sides, even with the one way flap.
I have noticed that that flap is installed with 2 plastic pins that are melted down to hold the flap in place. I have had one come loose due to not being melted all the way down or just wore out and caused the little flap to swing a little to the side and not seal. There was enough of the stub left to re-melt back down.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!