Replumbing Help

Jump to latest Follow Reply
M

mauruz

0
Jan 30, 2012
22
Pool Size
6700
Surface
Plaster
Chlorine
Liquid Chlorine
Hi,

I'm going to have to re do the plumbing that goes from the Pump to the Sand Filter, from the Sand Filter to the SWG and the one that goes to the Polaris Booster Pump. Since I'm having leaks directly on the fitting that is connected to the pump, out of that Gray Jandy Valve and the Input to the Booster Pump.

So any recommendations, and any feedback on what valve I need to use to replace that Jandy Grey Valve, or do I just need a regular valve and then put a reducer to match the fitting of the Polaris Booster Pump?

Any recommendations also on how to tight the fitting that goes out of the pump, there always seems to be some water going out of that fitting.


9881998820
 
You have a non-standard plumbing setup. Your PB-4 pump is not setup the way the installation instructions say to do it. See https://www.zodiacpoolsystems.com/-/media/Zodiac/Global/Downloads/P134-1.ashx

You should not need the Jandy valve or need to shutoff the flow to your return when you run the booster pump. The whole purpose of the booster pump is to create enough water flow for your returns and the dedicated cleaning line.

You install a T pickoff in your water flow to feed the booster pump.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply