Had some questions for anyone who has a Circupool SWG or even knows about converting from 220 volts to 110.
Water values are all fine so we called Circupool as our new SWG is running but producing no bubbles. Was told our SWG is 240VAC and will run but not produce chlorine at 120 Volts. We had the SWG installed not realizing it was wired into the timer and is 120VAC. Voltage on the Circupool listing on Ebay stated 110-240v so we thought we were all set.
Wondering if anyone else has had the problem with Circupool and/or if it is practical to try and convert everything to 240 volts or if we are better off exchanging the unit?
Thanks
Water values are all fine so we called Circupool as our new SWG is running but producing no bubbles. Was told our SWG is 240VAC and will run but not produce chlorine at 120 Volts. We had the SWG installed not realizing it was wired into the timer and is 120VAC. Voltage on the Circupool listing on Ebay stated 110-240v so we thought we were all set.
Wondering if anyone else has had the problem with Circupool and/or if it is practical to try and convert everything to 240 volts or if we are better off exchanging the unit?
Thanks