Recent content by Yorker

  1. Y

    Partial to full pool drain

    Hey Marty, by any chance has my Pool Math Data log shown up yet?
  2. Y

    Partial to full pool drain

    Hmm, I just noticed, when I look at my data log (from my profile on line), the times of my entries at 7 hours later then the times my app shows. Thoughts?
  3. Y

    Partial to full pool drain

    Is it supposed to show in my Signature? I do see it in my Profile
  4. Y

    Partial to full pool drain

    Ok, I retested about an hour ago and the pH was at 7.2! I also turned on the sharing of my test results. I see it also includes my notes as well.
  5. Y

    Partial to full pool drain

    I do use the App, v306(3331). I’ll look for the share function when I get home. It would be great to figure this out.
  6. Y

    Partial to full pool drain

    Yep, 14.5%
  7. Y

    Partial to full pool drain

    45 min since adding the 44oz of MA, and the pH tests right at 7.5. So, Pool Math suggests 31oz MA to get to pH 7.2. Just before this, Pool Math suggested 44oz to get to 7.2. This seems typical though, I always need to add more MA to meet my target than what Pool Math suggests
  8. Y

    Partial to full pool drain

    THANKS!. Just tested at what looks like 7.7, and added 44oz MA. The pump is in pool mode right now (2000rpms), I'll retest in 45min.
  9. Y

    Partial to full pool drain

    Thanks Marty, I'll do that today! Though I do have a question that has always perplexed me. I generally run the pump at 2700 or 3000 for two hours before testing from another area of the pool from where the MA was introduced. I know ...I've read here on TFP that testing after as short as 20 was...
  10. Y

    Partial to full pool drain

    My TA was at 100 after the water exchange, two days later (yesterday) it was 90, prior to the water exchange it had lowered to 60. Yes, those are the numbers that I enter in Pool Math (or remain from my most recent TA testing)
  11. Y

    Partial to full pool drain

    Finally an update. I waited until our CH reached 990 to do the drain/refill water exchange Marty recommended. My fill water's CH was 350. Pool Math recommended a 100% refill for a target of 350. My calculation was 27 hours based on how much water the sump pump took out (360 gal per hour and our...
  12. Y

    Magic Lube Clean-up

    I'm sure I've tried that, I know I have trouble using them, just have issues with how they feel, and affect (or is it effect :-) my dexterity. But this too is something I'm going to try. Thanks NewD
  13. Y

    Magic Lube Clean-up

    Thanks Jason, I do bring paper towels, or an old rag that I'll just throw away. But I gotta say my hands still feel sticky as I'm handling the wrench. I have tried using dish soap (lots of soap), and it is no help at all. I hate to think this, cus I'm generally a fairly neat guy, but maybe I'm a...
  14. Y

    Magic Lube Clean-up

    I've done my best to search the site, but unable to locate any posts about this. Other than using wd40 spray, are there other products to clean your hands? I'd like to be able to clean them while getting the bracket back on the pool filter casing. Suggestions? Thanks, Y
  15. Y

    Startup Stonescapes Mini Pebble Pool

    This link should take you to the area of my pool build thread that shows the full chip-out.