Recent content by Xiaosong83

Thank you, that is good information. My pool stats this morning after using the pool yesterday and not generating using the SWG overnight. 4% FC, 0% CC, pH 7.9 I see what you mean about the sensor, it is back up to 3000ppm this morning with a cooler pool temp. I know salt solubility changes...

Thank you, that is super helpful information. After adding the liquid chlorine and running my pump at 1500rpm last night, I tested FC at 5.5 this morning. So today my salt level from the sensor has been reading consistently 2700ppm. It seemed like the salt reading varied a bit yesterday when I...

It runs from 7am.to 8pm. I'm not quite sure how to set it for different speeds for different times yet. Yup, done. I should be around 6 because I just added 1 gallon of 10% liquid chlorine Ok, that is a good place to start. What do you recommend for speed schedule? My pool pump does 70gpm...

I am testing with a pH/salt probe from Amazon that is similar to the one sold by TFtestkits so I guess I'm not sure how accurate it really is compared to the salt cell sensor which says 3000ppm right now.

I originally had the fusion2 that wasn’t being used with the tablet dispenser and had the PB switch it to a fusion2 soft with the power center that is labeled Aquapure, ended up being about $2600 for the install. I had them hold off on installing the mineral cartridge so the blank cap is still...

Alright, sorry for taking a while to respond. It’s been hectic moving and setting up a new house. I went ahead and did a ~60% drain and refill and also installed a Nature2 Fusion soft 1400 which is currently set to 0 production for now. I also added 200 pounds of pool salt when refilling...