Recent content by Ugbe

After Chiseling the Spa Bench to reduce the height in some seats, some of the REBAR were EXPOSED as seen on the attached Picture. PB is looking to CUT them out and redress with Non Porous Concrete. Is this a good fix? What kind of Concrete Mix will be adequate for a THIN Application because I...

Ok. I will discuss this with the PB. Thx a lot.

The Predominant Wind direction is South-West for 9.2 Months, towards the Skimmer's Position, from February 8 to November 13.

Thank you so much.

May I please get advise on the PB’s 4 Return Positioning for a 15 x 30 Rectangular Gunite Pool. Picture is Attached.

Here are the details… 15k Gallons, 15' x 30' New Rectangular Gunite Pool & Spa Combo, 3'-6" Shallow End, 5' Deep End, 7’ x 7’ Baja with 2 BUBBLERS, adjacent/attached 7’ x 7’ SPA with 4 Three-Jets-Thread-In Manifold, 4 Spa Jets, 4 Calf Jets, 2 BUBBLERS. Bellow are the Equipments the PB said I...

Please SEE Picture for what am Planning to DO and ADVISE me. Thank you!

I was thinking that the FIRST RETURN form the FILTER/HEATER/SWG System will GO to the POOL + SPA and the SECOND BYPASS RETURN will GO to the JETS in the SPA. Will this WORK?

Can the SECOND RETURN from the Circulation Pump BYPASS the Filtration System (Filter/Heater/SWG) and GO STRAIGHT to the SPA JETS to get OPTIMAL Pressure?

I really do appreciate your response here. Thank you, and thank you for the Pump Spec. Now, is it possible that I ask for this following set up listed BELOW... - - Circulation Pump (3HP): INTAKE Line from POOL + SPA, and THROUGH the FILTER/HEATER/SWG, to RETURN Line feeding POOL/SPA Eyeballs...

Here is the 3HP Pump model number 011078. PB is proposing Waterways Renegade Skimmer. Are there BETTER ones out there? Here is his proposed Set up... - Circulation Pump (3HP): INTAKE Line from Pool/Spa, THROUGH the FILTER, HEATER, SWG, to RETURN Line feeding Pool/Spa Eyeballs + another RETURN...

Thank you for letting me know this.