Recent content by tdi_jim

  1. T

    High salt causes?

    Did you check your fill water before adding salt? My fill water (aka tap water) had 680 ppm salt.
  2. T

    Crazy question

    He won't bite.
  3. T

    chem geek

    Thanks and congratulations
  4. T

    What I believe to be scaling, requesting assistance with resolution

    Thanks, the first PH number was a guess since it was off the charts. The pool is 35K gallons, the length is over 50 feet, I took a water meter reading before and after filling it; the deep end is real deep at 9 feet. For the first acid adjustment I will come clean and admit that I used 1 gallon...
  5. T

    What I believe to be scaling, requesting assistance with resolution

    Thanks again, That makes sense the acid demand is lower than it was last year.
  6. T

    What I believe to be scaling, requesting assistance with resolution

    Thanks chem geek. I am going to be adjusting chemistry (TA) for a SWG, when I close this autumn (Oct - May). Is there anything you can recommend to avoid this happening next year? Lower CH? Testing and adjusting Chemistry while pool is closed?
  7. T

    What I believe to be scaling, requesting assistance with resolution

    Update: Based upon browsing this forum: I tried dropping the sediment into MA and it fizzes, is this the acid test for calcium-something? I believe that this is a minor scaling issue so I dropped the PH to 7.2 yesterday and it appears that vigorus brushing helps to remove what is left of the...
  8. T

    What I believe to be scaling, requesting assistance with resolution

    Yes sorry I forgot to mention that. I took a look at that link and my deposits not as crystalline as those in that thread and definitely not as severe as those calcium sulfate deposits mentioned in the article.
  9. T

    What I believe to be scaling, requesting assistance with resolution

    Hi All and thanks for the replies. Sorry for the 9+ reading it was just a notation to myself to indicate what appeared to be an off the scale reading (above 8.2). I use the TF-100 test kit for my testing and the pool calculator to adjust chemistry. The 150oz of MA did bring the PH down to 7.5, I...
  10. T

    What I believe to be scaling, requesting assistance with resolution

    Hi All, We did a pool renovation last summer (August 2014), I closed the Pool on 9/20/14 with a PH of 7.2. The pool was opened yesterday and after opening yesterday and running the pump for 5 hours: I am currently using CL tabs and once this is resolved I will add the salt and convert over...
  11. T

    It's so sparkly

    It is Diamond Brite Super Blue, the actual color or appearance at anyone moment depends on the sun and wave action.
  12. T

    Who's into Cars? My real passion

    Love cars, all kinds; when I'm not testing my pool water or skimming leaves you will probably find me washing the cars.
  13. Photo.jpg

    Photo.jpg

  14. T

    It's so sparkly

    I have been following the TFP method since we did our renovation in July and I must say it is looking good! I was considering adding borax next season, but I don't want to blind anyone with more sparkle. Thank you Jason and everyone else that makes the forum so helpful.
  15. P1070891.jpg

    P1070891.jpg