Sws's latest activity
-
SSws reacted to Jimrahbe's post in the thread Reinstalling Hayward 1.25 hp - all done except WIRING QUESTION: 2 black wires,no white (+ green ground); how to tell which black wire is the supply? with
Like.
Jack, You really can't go by just the wire color.. In 'general' two black wires would mean that your voltage is 240 volts.. In which... -
SSws reacted to JamesW's post in the thread Reinstalling Hayward 1.25 hp - all done except WIRING QUESTION: 2 black wires,no white (+ green ground); how to tell which black wire is the supply? with Like.
For 240, there is no polarity.
-
SSws reacted to TinFoilHat's post in the thread Pool guy added too much shock and now FC is 40ppm with Like.
Get a TF100 or TFPro test kit, some liquid chlorine and take it over now. There's no need to use a pool service if you are home every...
-
SSws replied to the thread Replacing the heater again, please give me your thoughts on the best brand.Agreed. Its connected with an indoor range flex line. Also looks like the gas line goes all the way to the right and loops back left...
-
SSws reacted to ajw22's post in the thread Replacing the heater again, please give me your thoughts on the best brand with Like.
Your heater is outdoors, which is good. Your gas line does not look like it follows Pentair’s Installation Manual. Read Heater...
-
SThank you all for replying. I will start with the TF Pro Salt kit. I look forward to learning about the testing process and I’m sure...
-
SSws replied to the thread New Pool Owner- test kit recommendations.TFPro Salt here. I don't regret buying the c600 dipper and slam option. I also got the standard sampler to verify my interpretation...
-
SSws replied to the thread Thinking about getting a new Pentair pump.Yea. Id just kill the feed. When the time comes, ill do a 220 receptacle to bring the pump inside. Our winters wreck stuff.
-
SMine goes to an outlet so I can easily unplug it to bring it inside for winter. Pool equipment is designed to withstand the elements...
-
SSws replied to the thread Thinking about getting a new Pentair pump.I have an intelliconnect. I could wire it through those relays also. Id have the intelliconnect and breaker that way. I wasnt sure if...
-
SSws replied to the thread Thinking about getting a new Pentair pump.I have a subpanel right next to it so I can go straight to the breaker. I just didnt know if it needed some other form of physical...
-
SSws replied to the thread Thinking about getting a new Pentair pump.Are you guys hardwiring the 220v pumps straight to the breaker or are you adding a manual disconnect inline?
-
SIf your pump is still in working order I would invest in the salt cell first. My only regret is not doing it sooner. Lugging bottles of...
-
SSws replied to the thread Need Help with Pentair IC40 SWG.If you're going to have the gas piping re-done (and im not saying you should or must) then put an insulated union on it also. There...
-
Shttps://www.troublefreepool.com/wiki/index.php?title=Heater_Maintenance#Heater_Gas_Sediment_Trap The correct sediment trap design is...