Recent content by SteveK52

  1. S

    Skimmer cover attachment

    Lot of wind last night which blew through my skimmer and sent the cover flying. Trying to avoid putting the screws in and out. Anyone come up with a quick-release method? I don't see anything on the internet.
  2. S

    Backwash Flow Rate

    Jim, Thanks
  3. S

    Backwash Flow Rate

    My DE filter manual does not mention anything about recommended flow rate for back-washing. Does anyone have information on this? Thanks in advance. Steve
  4. S

    Screenlogic2 Features?

    Jim, Really appreciate your help. A couple of things, my Screenlogic shows a Spa and I don't have a spa and sometimes when the mornings are cool it indicates spa is running when actually the pool is running. Also, it looks like I cant just increase or decrease the pump speed with the Android...
  5. S

    Screenlogic2 Features?

    I have installed the Screenlogic 2 Interface however the user manual seems a little lacking. I'm not sure of exactly what I can do with this. The PC program seems to have more flexibility than the Android app. For example it doesn't appear that I can change the pump output from the Android app...
  6. S

    Salt tests not agreeing

    Thanks for your patience.
  7. S

    Salt tests not agreeing

    And I thought I was confused before I asked the question. So, when should I check salt level with the Taylor kit and when do I add salt?
  8. S

    Salt tests not agreeing

    Purchased the recommended Taylor K-1766 salt test kit and did a test this morning with the following results: K-1766 4200 ppm, test strip 3190 ppm and pentair screenlogic 3200ppm. What did I do wrong?
  9. S

    Air in Pump Basket

    Thanks for taking the time to reply Seeing it's a new build I am going to contact the builder. Hopefully he won't say "they all do that".
  10. S

    Air in Pump Basket

    How much if any air is acceptable in the pump basket? Running at 28 GPM for 12 hrs. There always seems to be an air bubble which appears to increase over time.
  11. S

    Newbie Looking for Advice

    Thank you very much for your help!
  12. S

    Newbie Looking for Advice

    Latest test data FC: 5 CC: 0 CYA: 50 PH: 7.6 TA: 140 CH: 300 Salt: 3300 (taken from pentair software (does anyone know how accurate this is?)) I'm planning on bringing the PH closer to 7.4 and raising the CYA closer to 70. Any Suggestions?
  13. S

    Newbie Looking for Advice

    No problem, spray deck and landscaping need to be done.
  14. S

    Newbie Looking for Advice

    Thanks for taking the time to reply. The FC is from the TF100 test kit. Hopefully once I get things where they belong this will be easier to control.