Recent content by snetwork

  1. S

    CYA Level Too High After Refilling Pool Halfway — Please Help

    Thank you. We are going to drain the entire pool this time. Is there any issue with filling the entire pool with the well water based on the well water having 532 mg/litre, calcium is 222 mg/litre and iron is 3.6 mg/litre? High sulfates, dissolved sulfates, total hardness, dissolved solids...
  2. S

    CYA Level Too High After Refilling Pool Halfway — Please Help

    For reference, we tested the Cyanuric acid just now and its not even making it to 100 before the black dot disappears.
  3. IMG_4153.JPG

    IMG_4153.JPG

  4. S

    CYA Level Too High After Refilling Pool Halfway — Please Help

    Hi guys, we could really use your help! Thanks in advance for any help you can offer us. - We have an indoor saltwater pool that had a high level of Cyanuric acid - The pool company recommended we do a partial re-fill so we drained the pool halfway and refilled it (approx. 12,000 gallons of...
  5. S

    Re-filling half of a saltwater pool with HIGH IRON well water

    Hello, We are re-filling half of a 24,000 gallon saltwater pool with well water that has very high iron content. We started re-filling with 3 different filters in big blue filter housing: - POOLPURE Garden Hose End Pre Filter for Pool - Pentek WP.5BB97P Compatible String-Wound Polypropylene...
  6. S

    IntelliChlor IC40 displaying Inspect Cell with 60% Life left

    Hello, The "cell" light is flashing green. We took it off and inspected it -- it seems to be clean. Recent water sample is showing our salt at 3800ppm. Is there anything we can do to try and get this salt cell working? We've went through a few of these already... Thanks a million.
  7. S

    Salt Water Chlorination & Failing Jandy Heat Exchangers - Please Help

    OK so buy these for filtering the well water when filling the pool? Does anybody have the thread handy so I can see what fittings he had to buy to attach the two big blue filter housings together and make it compatible with a hose? 10" Big Blue Filter Housing --...
  8. S

    Salt Water Chlorination & Failing Jandy Heat Exchangers - Please Help

    OK so just to confirm, being in Canada, I will need to order all of the below? Taylor K-2006C -- https://www.amazon.ca/Taylor-K-2006C-Complete-Swimming-Alkalinity/dp/B0002IXIJ0 Taylor K-1766 -- https://www.amazon.ca/TAYLOR-TECHNOLOGIES-K-1766-CHLORIDE-WATER/dp/B001DO35EU Taylor 9265 Magnetic...
  9. S

    Salt Water Chlorination & Failing Jandy Heat Exchangers - Please Help

    Thanks for the quick response guys. This is the kick in the Rear we needed. We picked up a Taylor K-1005 test kit and hopefully this is accurate (27,000 gallon pool): Free Chlorine = 1 Total Chlorine = 3 pH = 7.2 Alkalinity = 230ppm (Pool company said it was 125) -- multiplied drops by 10...
  10. S

    Salt Water Chlorination & Failing Jandy Heat Exchangers - Please Help

    We rely on the pool company to tell us what to do with weekly / bi-weekly water samples. This is a vinyl liner pool. The Jandy heaters just started leaking water, presumably the heat exchanger corroded and let go (no errors).
  11. S

    Salt Water Chlorination & Failing Jandy Heat Exchangers - Please Help

    Hey guys, We would really appreciate your expert advice and opinion on this. We have an indoor salt-water pool that is running year round at around 87-90 degrees. We have a Pentair IntelliChlor IC40 Salt Cell that automatically adds chlorine to the pool. Since 2017, we've had several salt...
  12. S

    Anybody in Fort Lauderdale install a Riverflow System? Urgent!

    Hello, I'm in Fort Lauderdale until early tomorrow afternoon. Would anybody have time to let me see their Riverflow system in action tomorrow morning? i called Riverflow and Phil said he can't find a pool for me to see but I'd love the opportunity to see one before I fly back home to canada...