Recent content by SilverSD

Unfortunately, I'm in the same situation. Mine will roll backwards short distances or turn in reverse but never moves forward. This happens in the middle of the pool and is unrelated to the walls. Really hoping someone has ideas to fix.

My IC60 went out quite some time ago and I haven't been able to get a replacement. I have to admit I haven't tried consistently since I have been working from home more and just maintained it with liquid chlorine and MA. I figured I could just wait out the supply shortage. But now I'm going...

That's what I was afraid of. 80% is 8000 hours right? What is the life expectancy of a cell? I hate to throw away 20% if that's what it's saying. But if 8000 hours is typical then I guess it's time. Related question, I saw on the ICxx swg info page that it should not be on all the time but...

Ahhh, ok. Hours usage 80% Temp 60% Thermometer 84°

Are you referring to the hours of usage? Or are there more diagnostics to be gained? I didn't see any other diagnostics at that page.

No, I didn't know about the diagnostics. I will do that. Thanks!

Not today. But it was clean last week. Nothing on the fins. No bubbles when I did an acid clean.

The cloudiness cleared about 2 days after my last post. I did as you said and the water has remained clean and clear for the past week. OCLT did not show any drop. Normally the pool is green. That's normal right? Just kidding. Sorry the videos didn't work. I had just turned down the pump so...

This is primarily a question about my IC60 but there have been several changes so not sure what might be impacting it. A brief history: FNSP60 cracked, delay getting replacement, so no pump/suction pool cleaner for some time. I got the new filter installed Tue. night and have been running it...

So after calling around it looks like I can get the ccp520 for$1099 plus tax which seems like a good deal. You mentioned no multiport. My current setup has a push pull to backwash and lower pool levels after it rains. Is this ok? Or would you just have unions directly to the filter?

Awesome. I'll check for availability. Hopefully it will be available. Most places I called specifically said that it was DE products that were backordered for Pentair.

Thanks! And that's the clean and clear 520?

I appreciate the input. But I would like to know more about why the 520 cartridge filter is a good choice. Is there a reference or discussion where I can learn more?

So in terms of what is available locally, I can only get a FNSPlus 60 or Quad DE 60. The Max flow rate is 120 for the quad de 60, so if I understand correctly I would have to limit my intelliflo so it doesn't go above that. Not sure if that is a good solution since optimally the filter would...