Recent content by shoyru177177

Thank you for your advice! I will spend some time letting it all soak in and doing some more research.

Thank you Chris! Your insight is very helpful indeed. Thank you for replying in such depth, ajw22. The 2200 gallon option and the 7000 gallon option SWGs are in the following Amazon link. https://www.amazon.com/Intex-Saltwater-Electrocatalytic-Oxidation-7000-Gallon/dp/B073S4XJGF/ref=sr_1_1...

I'm brainstorming the idea of a SWG for a small steel-framed, vinyl liner 1718gal pool that is annoying to maintain chlorine daily. In an old post, I saw a someone mention to oversize SWG 2-3x the capacity of your pool, i'm presuming so that you can generally maintain your FC at a lower SWG...

It doesn't leave a stain. It gets vacuumed or brushed and then it comes back in a day or two depending which method was used. I know he more often just brushes it towards the filter because he doesn't have time before he goes to work. Does this stuff being present mean the pool doesn't pass...

My friend decided to stay the course and continue the SLAM because he's already over a week into it at this point, and the pool has been so clear. He reduced his nightly SLAMS to target 20ppm FC in accordance with the SLAM instructions. In the hours from dawn to 2pm it burns off to usually sit...

Thank you! I will refer my friend here to see your suggestions! I'll be back if there's anything to update. Thanks again.

Thank you for your speedy reply! I had a few questions around what you suggested. 1. Do you think he has so much SLAM FC loss in the sun because of the small capacity of the pool, compared to a pool with like 30,000 gallons at the same CYA level? Would this not happen if he fully passed the...

Hello everybody! I'm here for some advice in lieu of my buddy who has been shocking his pool first to 20ppm FC and then later having bumped it to a target minimum of 30ppm FC due to a recent algae bloom that may be mustard algae. He's in Central Florida and has a 1718 gallon above-ground vinyl...