Recent content by sedor121

Thanks just processed my donation - have a great evening everyone!

Thanks for all the info! So, right after I posted that I got to thinking that maybe I had the wrong cord - I live in Maui and it is difficult to find things here. I went to Ace Hardware and asked for the same cord and the lady told me it was the same cord. Looks similar but had some different...

Hi Everyone - here's an update: system has been running fine without the screenlogic2 system connected only bummer is the spa side remote also went out so the only way to get the spa to work is to go over to the ET controller and manually turn it on. This is fine for now but definitely want to...

Thanks for all the info and hope everyone enjoyed their Super Bowl weekend! I am going to try all of these suggestions and I will report back with what I find. Quick question, when you say the black terminal blocks pull off the board are you saying that the entire black module can just be pulled...

ok I think we are getting somewhere! The black wire that is connected to the comm port is the VS pump and the white cord that is connected to the comm port goes to the intellichlor surge board. The white cord coming off of the intellichlor surge board goes to the spa side remote which is a 10...

Thanks again for the follow up. I have not changed anything with the router or home network. Attached are photos of the boxes inside and the comm port and overall setup. I forgot to take a photo of the outdoor antenna so I will have to go do that but essentially it is just attached to the wall...

Thank you SO much for the response Jim! I neglected to mention in my first post that we also had the spa side remote connected to the comms port. So, in total we had three things connected to the port - the spa side remote, the VS pump and the screenlogic2 system. I removed everything and...