Recent content by Scowman

What brand of dielectric grease do you use?

I think dielectric at the base under the o-rings and retainer plate is a good idea but definitely not a good idea on the pin to socket connection. If anything that should be conductive grease. I often find people think dielectric grease is for electrical connections when it really is for...

Is the arcing between wire socket and pin? If socket and pin arcing is the problem would you not want conductive grease? I though dielectric grease is NOT conductive. Would you not want something like carbon conductive grease between pin and socket? If pin to pin arching is the problem then I...

Found the problem. Center electrode corroded. This is the second cell that did that in less than 1 Year service life! What am I doing wrong here? Is Aquapure just junk?

Combined chlorine is barely above zero. If a full day's worth of 100% production is consumed, wouldn't cc go up?

I ran this cell voltage test I I get somewhere between 13 and 17vdc which is way below spec. Is that a board problem or a cell problem? How can I tell?

So I ran these three again (my original tests). The temps came back one degree low and this confirms they are within spec. The salt came in at 2.6 but I did recalibrate it. Not sure how to uncalibrate it now. Gotta go to work... More tomorrow.

These are 11.85v and 5v so they are good.

This test is 20v so that is good.