Recent content by sapool101

Update: After trying different options, I did a reset of all solar settings back to pre-solar and reconfigured everthing again. The actuator seems to work as expected now. Also, thanks Ahultin in for the suggestion, my water temp reading was off a few degress, even though that was not causing...

I believe this is a new behavior and yes the Solar actuator is connected to valve A or Solar Valve. Valve B is empty in the board. My intake and return actuators work perfect when I switch bet. Pool and Spa.

Some additional context, the actuator was in ON2 position when I switched the mode on the panel to Service/Timeout and it automatically turns off, meaning there is a signal going to the actuator from the panel. The only time it does not turn off is in the Auto mode.

My solar valve will not turn off when the filter pump shuts down for the day or if the solar temp is below the water temp. The actuator is set to ON2 position and the Easytouch 4 is in AUTO mode. When I turn off the Pool heat or reduce the pool temperature below the solar temperature, I hear a...

Thanks Jim. I will use the pool light relay for now.

Need help to change the Spa light control to different Aux. I have a color changing pool light but my Spa light is steady warm colored. The previous owner had the spa light configured in the Solar switch on easy touch control panel. I recently installed solar pool heater and now the Spa lights...