Recent content by SanibelBlue

I have turned production to zero. Thank you for your help, Jim

Oh ok, so should I just turn the output to zero and don’t worry about all the flashing lights? I was thinking the lights would go out but they never do. I don’t know why the cold light shut off doesn’t come on, it always used to but so far this winter it hasn’t, even when the water gets into the...

Good afternoon, I looked through the board but didn’t see my exact problem addressed. In anticipation of the cold coming into the gulf south I have disabled my Pentair IC40 through the intellicenter but the lights are still on. Low salt, flow is green, set output to 20% because if I turn it any...

Thanks very much for your help!

One question on the service mode— is that for 24 hours or is it permanently off until I put it back into auto mode? Thank you!

Oh that’s awesome! I’ll do that! Thank you!!!!

Ok thank you so much! I don’t mind losing the time setting but everything else is out of my depth. I just want to make sure the booster pump doesn’t try to come on either. So I guess I’ll switch the black ones on the left off and leave the small low voltage ones on if that seems right? Thank you...

Good afternoon, I‘m having some tile replaced tomorrow morning so need to lower the water level tonight. My pool comes on every morning at 7 and the booster pump runs from 9-11 for the vacuum to run. I am wondering if I can just turn off the two/three black breakers (bottom left) on my easytouch...

Hey Jim, thank you for the help. Yes, it has the box on the wall, I think it’s the easy touch. I put it at zero on the wall system and all the percentage lights on the cell started flashing green. I watched them for a minute or so and they kept flashing so I moved it back to 20% so they would...

I tried that earlier today and all the lights started flashing green.

Hey Jim, The cold water light isn’t coming on. It says low salt but still has green lights on for flow and the percentage production. The pump is running in freeze mode. Pool temp is down to 45 now. I looked at what ajw sent (thanks for that ajw22) but am not real comfortable trying much along...

Good afternoon, Just have a quick question. Our air temp is 30 and the pool is 47, pool is running in freeze mode. The ic40 is still running although it says low salt (cold water). I disabled It in settings but it stayed on. We don’t have a spa but it was listed as 1/2. I don’t know why the...

Oh good idea! Thank you!!

I will do exactly that! Thank you for your help!