Recent content by Sam83

So after I changed back to normal DE and I switched to having the skimmer only, the white stuff are completely gone. The water is crystal clear. I will start with vacuuming once a week on weekends and keep the suction on skimmer only and see if that would be good enough. I wish there was a way...

1) Hi, yes I removed the adapter and the tornado thing goes away unless I really go high in pump speed > 2200. so with just the skimmer I dont have the air sucking any more 2) I agree with the vac not being needed all the time, but its hassle to manually connect / disconnect. currently i have...

maybe a silly question but this does not have any holes, how do I get my VAC hose through it and connect it to the skimmer? I thoight it should come with one or two holes to match my skimmer

Hi, here is number and pictures of the skimmer. I also like to report that after switching back to normal DE on Saturday, i see a significant reduction in the white stuff. My theory is that my grids do have a very tiny holes and the cellulose fiber goes through them and a small portion floats...

Will do thank you

Hmmm i dont recall seeing this. Would it be near the pump?

Here is a picture

Yrs main drain is at the deep end(other side). I dont know of any control valve. Is therw is one i have never used it.

Hi it opens when the pump is running with water flow. Although most of the time, i have the vac connected and since the hose go through the door. It forces it open.

I never had one. Any recommendation for the skimmer?

It does it down to 1200,. Is it bad for the pump? With wirpool it cleans the surface much better. Everything gets sucked in immediately

No the water level is fine. I put a leaf so you can see the water level