Recent content by River View

Note to self … when it does not seem right, it probably isn't. :hammer: I used the plug that came with the multi-port valve and there is a small … drip … drip … leak. It is coming from the top of the plug where it meets the main bode of the valve. Anyone have any ideas how to stop the leak...

I am replacing my filter with a Hayward DE Pro-Grid and am using the SP0740DE Valve. The Valve offers plumbing ports for the pump on both sides and comes with a black PVC plug to install in the unused port. However, when I dry-fit the plug, it fits very loosely. I am used to PVC fittings where...

Jim - Thanks for the response! ... Yes, pool only. The device between the IC40 and Heater is a FlowVis flow meter that I had inherited. For the solar system ... does the roof temperature module come with the ET or is that part of the valve or actuator? A follow-up valve question ... while...

I am planning spring upgrades to replace my pump, add solar, add automation and convert to SWCG. My plan is pictured below (excuse the drawing skills) and would appreciate any feedback and thoughts on the following questions: - For the Easytouch to control the solar, what additional items do I...

Thanks for the response. The new pump will be VS. Sounds like running the water the extra 100' will not require significantly more energy.

I am starting to plan some spring renovations which will include pump replacement, conversion to SWCG w/ Automation & installing Solar Heating. I will have some question on the automation, but starting to work on my plumbing plan currently and have a question about best practices for plumbing...

Updating with some results. Thank you everyone for the responses. I cleaned and lubed the gaskets on the union/valves from the two suction lines and the pump lid and that fixed the issue.

I like the fire bowl. For a fire pit, I have had my eye on this on from Fire Pit Art ... https://www.firepitart.com/bellavita34/

I have a Hayward 1HP Super Pump located about 4' above water level. It is fed by 1 floor drain, and 1 skimmer. It normally takes 3-5 minutes to prime, and then pushes lots of air bubles out of the returns and then runs well. This morning, I noticed about 30 minutes after the pump came on (on...

I purchased a house with a pool a little over a year ago, and I am coming to the end of my first full season. Pool specs in my signature. I am currently starting some removations and upgrades. I have a PB replacing the liner and rebuilding the stairs. I am currently planning a conversion to a...