Recent content by Rene M

Remote now just says “connecting”, then finally “connected”, eventually “waiting” and just seems to be stuck there.. as it did before I changed the frequency yesterday.. about ready to give it all up. I you do have a suggestion on how to turn the salt generator off/production to zero in this...

Thanks for your help JamesW. Was about to order the PLC1400 kit now things have changed. I was able to access the salt generator panel before it showed the service codes. Decided to turn the production to zero and use tabs or liquid to keep the chlorine up until repaired. Now when I power it up...

Well the board I have is different but I did locate the test buttons on the one I have. I did the tests as suggested in your last post. The gpl is 3.4, the pool temp is 74 and the H temp is 90. Those seem to be in range. Seems as if the gpl is higher but think is that normally, although my...

I have yet to do any diagnostics of the transformer, board power etc. should I continue to test the other items in the manual that you sent me a link to?

Trisensor plug connects to a small circuit board which in turn plugs in the board. I disconnected the small board from the board first and got a Jo code. I then disconnected the trisensor from the small board and reinstalled that to the large board and again got the code Jo (seems to mean it is...

I have not tried diagnosis yet. I will do that first and see. Just wondered if I would have different readings with a different model before I started

My cell is a different model/shape. My cell is a 3 port (round not square cell) and is model 1400. Can I assume the diagnostics are the same for all models?

I read through the troubleshooting guide you posted the link to. I will test the unit and post what I find. Thank you for the link.

I had the pool built less than 6 years ago. Will be 6 years next month I guess. I would have expected i would last longer than that.

New to the forum so please bear with me - Suddenly having trouble with my salt generator. Was checking the salt level at the box and noticed it showed in reverse but also said “no flow”. Was fine for days then the remote showed “no flow” a couple of times then would be fine. I noticed tonight...