Recent content by Rcrtfp

Gotcha. I am diligent with my Taylor kit and liquid chlorine addition. Hopefully less acid now that the fountains are not full blast raising the ph.

I used that rpm out of ignorance because it was less that open throttle as before and I didn’t want to go too low and have a green pool later. I’ll adjust to your guidance.

Here are my new labels/settings for vsp and new schedule. My goal is to run the filter pump 12 hours at night. Since the filter pump ( speed 1) is the lowest speed and I want to run it higher, I add a vsp schedule within the time frame of the filter pump schedule. Sound/look right?

@HermanTX Ok. I got it. Thank you all so much for your time. Im reading through the link for further reading. Ill send pic of plumbing when I can.

It makes more sense now! Thanks so much. I will go in and adjust my vsp settings speed 1 to the lowest. @ajw22 can you tell me why if I schedule a different schedule name other than filter pump (speed1) the pool temp sensor isn't active? I assume since its the main pump running it is flowing...

Maybe I’m dense, but initially there was no label for filter pump in vsp settings. Speed 1 was labeled pool (so I changed it back to that). If I only run a schedule with vsp1 spd adjust it will run the main pump but I don’t get temperature reading and the filter pump tab is not switched on in...

I set it for a minute apart because on one random you tube video it said don’t stop and start schedules at the same time… I think I figured it out. The vsp 1 speed setting is your filter pump default speed. I set that to lower speed than max like the builder had it initially. Now it seems to...

I’ve searched and searched but cannot find an answer. I’ve learned so much in my few months of pool ownership about chemicals from this website and I just am learning that my pump has been going full rpms for 12 hrs every day and I have a vsp. I run it 12 hrs overnight with fountains out of the...