Recent content by raphaelh

Hi all, The pump is below the pool level, and one of the valves was not closing correctly. The pool guy came and replaced the 2" pipes with 1 1/2" pipes Before (on the left) vs after (on the right) : At the bottom left the incoming pipes are Skimmers / Vacuum / Bottom drain and the pipe on...

I finally found a way to get a Taylor K-2006 delivered to France :) Is it possible to have a good CYA test reading even when the water is stagnant and dark green ?

Thanks for all the suggestions I finally found a way to have Taylor K-2006 delivered to France :)

There's Taylor K-2006 multiparametric analyzer test kit which is 167.60 € + 10.80 € shipping to France -> 178.40 € (thanks to @PJinFrance) Also KIT DE SERVICE TAYLOR COMPLET FAS (TAYLOR - K-2006) 840036004463 | eBay

I've found it here : Photomètre lovibond MD 100 6 en 1 It's 4x more expensive than the Taylor test kit Are you really confident in the accuracy ? Thanks for the recommendation

Could you expand a little bit on why you would choose this one?

I already looked at this information, but didn't find an answer Just got a reply from BEHQ Quoting below :

that's good to know, thanks for this information!

Thanks PJ this is really helpful! I wonder why others can't sell in France whereas they can....

I've read all the threads on TFP about available test kits, to try to find an accurate test kit in Europe And also Pool Test Kits - Further Reading Here are my findings : TfTestKits TF-100 : impossible to find in Europe Taylor K-2006 : impossible to find in Europe LaMotte 7022 : Fas Dpd...

Hi everyone, I'm been following since a long time and decided to create a profile :) Thanks for all the good information you share ! I've got a 75 cubic meter underground pool (approx 20 000 gallons), with a liner, Pentair Triton Neo Clear Pro SM filter (flow 22 m3/h), and Pentair Ultra Flow...