Recent content by quattro1

Re: raised pool equipment 4" while pool was being replastered, now pump loosing prime It's all set! Found four small leaks - three Jandy fittings (clean well and lube Orings) and one small leak at a PCV connection between heater and filter which was a very easy fix, also found the drain screw...

Re: raised pool equipment 4" while pool was being replastered, now pump loosing prime Thanks guys for the help. Jimrahbe I read your analogy about the drinking straw in another thread when I was searching the forum for pump priming issues. Excellent example. So, I went out this morning and...

raised pool equipment 4" while pool was being replastered, now pump loosing prime? Hello all, I recently had my pool refinished (Pebbletec). The company did an outstanding job. While the pool was being refinished I raised all the equipment (pump, filter and heater) about 4" as the pump...

My pool automation is a Jandy Aqualink RS One Touch. The lighting in my pool is a pair of Pentair Intellebrite lights. On/Off is controlled by the Aqualink but, to change the colors of the lights etc I need to turn them on/off and make lighting adjustments as one would with a regular wall...

Hello all, I have a Jandy Aqualink RS One Touch controlling my pump, heater, valves, lights, etc. I'm looking to purchase a salt water system. I've read that the Jandy Aquapure will talk with my Aqualink and provide system info through the one touch display in the house. My concern is from...

Re: Going BBB! Fresh fill this weekend and a few Questions.. Thanks everyone for the replies! I've followed your instructions and added enough Stabilizer to increase CYA to 40ppm. I'll test the level in a week to confirm exactly where I'm at. I've also added my first round of chlorine (using...

Hello all, well I can't begin to tell everyone how glad I am to get off the pool store treadmill! I've been chasing a greenish and/or cloudy pool all summer and when I stumbled across "CYA" last week and performed the test with my Taylor test kit my CYA was at 100!!! Of course this explains why...

Hi Racket, Both lights are the same physical size. I took a few measurements today: The lamp housing is 3-1/4" wide The lamp housing is 3-3/4" deep from the back where the cord comes out to the front where the lens mounts. This measurement is with no lens in place. The glass lens is 3-1/8"...

Hello all, I've searched all over the internet and cannot find the answer to my question - I have a pool/spa combo both containing a single light each. Both the pool and the spa both use the same fixture. After considerable searching I've determined that my fixture is a STA-RITE Sun-Lite . It...