Recent content by ps6000

I will try to do my best. I am new at all of this and don’t completely understand how much of this works. I will take some better pictures and write out the labels that document the flow and equipment. Thanks for your help and patience here. I do appreciate it.

It would only have been heated to a max 104 from the spa recirculating. Is that enough heat. The pvc is so warped that a normal sized coupling won’t fit on it.

Thank you very much for helping! I have added a couple of pictures. There is also a paramount in floor cleaner. Let me know if any more pictures would help. The secondary pump seems inline with the 1st as when I turn on the 1st I can see the water going through the secondary problem pump.

I also had an issue in the past where the pressure expanded the pvc pipe.

The picture of the diffuser you can see it compressed the fins on the diffuser. It is a brand new diffuser and basket. Filter is a clean & clear plus 520 When I move over to spa mode, the filter pump shows about 22 psi with the jet pump.

I have a 2hp whisperflo pump that has been having some problems with excess pressure. The pump is used for a spa. The pipes are all integrated with the vs pump. The pressure is so high that it has bent pump strainer baskets. The original one, and now a new one. The pump has been leaking so I...

I just looked up the caps location. Seems easy enough to test and replace. Would you know how to order the right go kit, if it comes down to that? I can’t thank you enough for your help!

Thank you. Do you think I should get a go kit since I am going to be taking this apart?

The back spins freely. I have noticed some oil leaking, and some oil in the water.

I did not look at that. I’ll check that today. Thank you