pjt's latest activity
-
pjt replied to the thread Short in IC40 power cord plug.Did that solve your problem? I had the exact same problem a few months ago and cleaning the pins and sockets fixed it. -
pjt replied to the thread New Chlorine Pool and I'm ready for Salt.The terminology is a bit confusing, but all "salt" pools still use chlorine as the sanitizer. All "chlorine" pools have salt in them...
-
pjt replied to the thread Plumbing updates input requested..You'll probably be fine with the VersaFlo. I don't know if it has the same efficiency as an external bypass, but it's much better than...
-
yeah it's this model here. Gas Pool Heater: JXi Pool Heater | Jandy the valve automatically activates the flow when it's running and...
-
pjt replied to the thread Betta bot & PH.A consistent background is key. I prefer a backlit background. To get a consistent backlight, hold the block in front of your computer...
-
pjt replied to the thread Target ph or CYA first.Keep maintaining SLAM FC until you meet ALL of the exit criteria and end the SLAM... No. Your current TA of 60 is great. TA down to...
-
Whoa... That's really something... will look into it. Thanks!
-
pjt replied to the thread Low PH, High Alkalinity help.Keep the pH in the 7s. Normally, add enough MA to lower the pH by a maximum of 0.4. Retest and add more MA if needed. Soda ash and...
-
pjt replied to the thread Plumbing updates input requested..I didn't know your heater had a bypass built in. How is it designed to work? The external bypass is good since you get the benefits of...
-
pjt replied to the thread Target ph or CYA first.Contaminates consume FC. Keep topping up the FC to SLAM level. The more often you top up, the shorter the SLAM. Do it when your...
-
pjt replied to the thread Ye Olde TA vs pH Debate.It looks like your block is bad/faded. How have you been storing it? Was it exposed to sunlight for a long time?
-
Look at the difference in color blocks between your comparator block... and mine...
-
pjt replied to the thread Deep end is cloudy.How are you testing? Fill out your signature when you have a minute.
-
turned off swg when I saw the fc Yes to your q re TA
-
pjt replied to the thread My pH rises from 7.5 to 8.0 in 2-3 days after every treatment with dry acid.Your #1 priority should be buying a recommended test kit. It's the foundation for proper pool care and will save you much time, effort...
